Abstract:This experimental study investigated the abrasive wear behaviour of pure copper-based and multi-walled carbon nanotube (MWCNT) doped composites synthesized by the powder metallurgy technique. Composite structures were formed by reinforcing MWCNT at different ratios between 1% and 8% in 99.9% pure copper by powder metallurgy. The microstructures of the nanocomposite samples were analyzed by X-ray diffraction. Then, density and hardness measurements and abrasive wear tests were performed to determine their mechanical properties. The collected data were evaluated with scanning electron microscopy images. It has been determined that copper’s nano-sized carbon reinforcement material has a dry lubricant effect up to a specific ratio, reducing wear losses. On the contrary, wear losses increase as the MWCNT reinforcement ratio increases between 4% and 8%. The best results in lowering wear losses were obtained from the sample with 1% MWCNT reinforcement. Depending on the increase in the amount of nanomaterial reinforcement in the composite structure, it was observed that pore formation enlarges with reinforcement agglomeration. It was concluded that the dense porosity in the composite structure neglects the lubricating properties of the MWCNT reinforcement material and increases the wear losses by having a negative effect.

An Investigation of the Sliding Wear Behavior of Cu-Matrix Composite Reinforced by Carbon Nanotubes

Investigation of the effect of lubricant properties of carbon nanomaterial in Cu/MWCNT composites on wear

Effects of carbon nanotube reinforcement and grain size refinement mechanical properties and wear behaviors of carbon nanotube/copper composites

Tribological properties of carbon-nanotube-reinforced copper composites

Friction and wear behavior of Ni-based carbon nanotubes composite coatings

Tribological Application of Carbon Nanotubes in a Metal-Based Composite Coating and Composites

Friction and Wear Behavior of Electroless Ni-Based Cnt Composite Coatings

Tribological Properties of Carbon Nanotube-Reinforced Composites

High-speed Electrical Sliding Wear Behaviors of Cu-WS2-graphite-WS2 Nanotubes Composite

Dry Sliding Friction and Wear Behavior of Cu-Nanosized TiB2 In-situ Composites

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

Influences of B 4 C and carbon nanotubes on friction and wear performance of Cu base self-lubricating composite

Mechanical Properties of Cu-Based Composites Reinforced by Carbon Nanotubes

Improving Wear Resistance of TiNi Matrix Composites Reinforced by Carbon Nanotubes and in Situ TiC

Preparation, microstructure and properties of Cu-8.3Al/CNTs composites with different volume fractions of CNTs

Tribological Behavior of the Carbon Fiber-Reinforced Epoxy Resin Matrix Composite with Orderly Arranged Carbon Nanotubes

Tribological properties of carbon nanotube-doped carbon/carbon composites

Fabrication and Tribological Properties of Carbon Nanotubes-Aluminum Composites

Microstructure Evolution and Wear Characterization of Cnts/Al-Cu-Mg-Si Nanocomposites Manufactured Using Semi-Solid Stir Casting

Tribological Properties of Blocky Composites with Carbon Nanotubes