Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The Cu base composites play a key role in multiple industrial applications such as bearing materials and carbon brushes owing to their superior thermal, mechanical and tribological features. Therefore, in the present investigation, synergetic influence of nano titanium carbide (TiCnp) and graphite particles (Grp) on tribological behaviour of Cu base self-lubricating composites have been studied. The composites with fixed 5wt% of Grp and varying amounts (1.5wt% to 4.5wt%) of TiCnp were prepared via flake powder metallurgy (flake PM) technique. The sintered samples were characterized by different techniques for phases, physical, morphological and mechanical properties. Pin-on-disc (POD) tribotester has been used to analyse the tribological behaviour of composites in dry sliding condition by varying loads (10 N to 30 N) and sliding velocities (0.75 m/s and 1.5 m/s) for a fixed sliding distance of 2000 m. The results indicate the successful formation of Cu-Grp and TiCnp-reinforced Cu-Grp composites. With addition of Grp, the wear rate and coefficient of friction (COF) of Cu matrix is reduced. The wear rate is further reduced with the incorporation of TiCnp particles. But, the COF shows the enhancement. The composite having 5wt% Grp–4.5wt% TiCnp shows the minimum wear and maximum hardness. The energy-dispersive spectroscopy (EDS) elemental mapping of worn surfaces indicates that TiCnp mechanically interlocks the graphite at the interface and prevent its removal and reduces the wear rate. The worn surface investigation also shows that the dominant mechanism of wear for pure Cu sample is delamination in nature. However, the mechanism of wear for TiCnp-reinforced composites is a combination of abrasive and delamination wear.

Sliding Wear Behavior of TiB<sub>2</sub> Nanoparticle Reinforced Copper Matrix In-Situ Composites under Electric Current

Electrical sliding wear behavior of TiB2 nanoparticles reinforced copper matrix in-situ composite

Dry sliding wear behavior of in situ Cu–TiB2 nanocomposites against medium carbon steel

Microstructure and Properties of In-Situ TiC Reinforced Copper Nanocomposites Fabricated Via Long-Term Ball Milling and Hot Pressing

Dry Sliding Friction and Wear Behavior of Cu-Nanosized TiB2 In-situ Composites

Properties and elevated temperature wear mechanism of pure copper and TiC/Cu nanocomposites

High-speed Electrical Sliding Wear Behaviors of Cu-WS2-graphite-WS2 Nanotubes Composite

Investigation of in Situ Cu-TiB2 Composite on the Copper Using Laser Melting Synthesis

Tribological behavior of in-situ nanosized TiB2 particles reinforced AZ91 matrix composite

Dry Sliding Wear Characteristics of In-Situ TiBw/Ti6Al4V Composites with Different Network Parameters

Preparation and properties of TiB2 nanoparticle reinforced copper matrix composites by in situ processing

Dry sliding wear behavior of titanium matrix composites hybrid-reinforced by in situ TiBw and TiCp

An Investigation of the Sliding Wear Behavior of Cu-Matrix Composite Reinforced by Carbon Nanotubes

Effect of Electrical Current Density, Apparent Contact Pressure, and Sliding Velocity on the Electrical Sliding Wear Behavior of Cu–Ti3AlC2 Composites

Dry sliding wear behavior of XDTMZl201/TiB2 in-situ composite

The tribological behavior evolution of TiB2/Al composites from running-in stage to steady stage

Abrasive Wear and Physical Properties of In-Situ Nano-TiCx Reinforced Cu–Cr–Zr Composites

Tribological properties of carbon-nanotube-reinforced copper composites

Synergetic influence of TiCnp and graphite particles on tribological performance of Cu based composites prepared by flake powder metallurgy

Dry Sliding Wear Properties of Annealed Carbon Steels Matrix Composites by Nanosized TiC‐TiB2 Particles