Abstract:CuW composites are widely used in the field of electrical contacts, such as high-voltage switch and microelectronic devices, and the service life of the key components is directly affected by its wear resistance and corrosion resistance. In this paper, the effects of loading current on the tribological behavior of CuW composites with different W content were studied, focusing on the variation of friction coefficient during friction, wear rate and the wear topography of the surface after friction, and the wear mechanism was discussed. The results indicate that the friction coefficient of CuW composites was larger under energized conditions than under dry friction conditions, and that the friction coefficient first increases and then decreases with the increasing current. The main reason for the decrease in friction coefficient is that the heat generated by increasing current creates a layer of molten lubricant on the contact surface. In addition, the wear rate of the CuW composites decreased as the W content increased. When loaded with a current of 15 A, the CuW80 composites exhibited the lowest wear rate of 8 x 10(-3) mg/m, which was attributed to the improved wear resistance due to the ability of the high W content to resist plastic deformation. The wear forms of CuW composites under current loading include adhesion, abrasive wear and arc erosion, and fatigue wear was also associated with long-term high current conditions.

A research on the electrical sliding behavior wear of dual-scale particulate reinforced copper matrix composites

Wear Behaviour and Microstructural Changes of SiCw-Al Composite under Unlubricated Sliding Friction

Microstructure and properties of dual-scale particulate reinforced copper matrix composites with superior comprehensive properties

Electrical sliding wear behavior of TiB2 nanoparticles reinforced copper matrix in-situ composite

Mechanical and tribological property of Cu/CrB 2 composites under dry sliding condition

Effect of the Thermal Expansion Characteristics of Reinforcements on the Electrical Wear Performance of Copper Matrix Composite

High-speed Electrical Sliding Wear Behaviors of Cu-WS2-graphite-WS2 Nanotubes Composite

Tribology performance of Cu-C/C composites with and without current

Tribological behavior of aluminum matrix composites reinforced with ceramic particulates in dry sliding against a semimetallic friction material

Effect of Electrical Current Density, Apparent Contact Pressure, and Sliding Velocity on the Electrical Sliding Wear Behavior of Cu–Ti3AlC2 Composites

Current-carrying Tribological Behavior and Wear Mechanism of CuW Composites with Different W Content

Comparative Study on Wear Behaviors of Metal-Impregnated Carbon Material and C/C Composite Under Electrical Sliding

Evaluation of dry sliding wear behavior of silicon particles reinforced aluminum matrix composites

Study on Friction and Wear of the Cu-MoS_2 Powder Metallurgy Material under Electrical Current

Dry sliding friction and wear properties of B4C particulate-reinforced Al-5083 matrix composites

The friction and wear of electroless Ni–P matrix with PTFE and/or SiC particles composite

Friction and Wear Behavior of Copper-Graphite Composite Material in High-Speed Sliding with Current

Research of Friction and Wear Behavior of Sliding Contacts under Strong Current Conditions

Mechanical and tribological properties of WC particles reinforced Cu-20Zn matrix composites

Microstructure, mechanical and tribological properties of Cu-Sn/Cr3C2/Gr composites