Abstract:<p>As an ideal reinforcing phase, nano-carbon has been widely used to improve the properties of composites. In this paper, Mo-Cu-Zr ternary composites were reinforced with various types and contents of nano-carbon to find the optimal composition and the microstructure and mechanical properties of the composites were systematically characterized and analyzed. The composites were fabricated via a powder metallurgy method to achieve high compactness and structural uniformity. The analysis results show that the increase of nano-carbon may cause a serious agglomeration and subsequent decrease of the composite compactness, while the synergetic effect of carbon nanotubes (CNTs) and graphene nanoplatelets (GNPs) can improve their dispersion. The 0.8C+0.2G-MCZ3 composite showed the best comprehensive properties, which achieved a relative density, hardness and compressive strength of 99.7%, 343.6 HV and 953.5 MPa, respectively. Moreover, the component Zr mainly formed solid solution and compound particles with Cu or C through in-situ chemical reactions. It played an important role in solid solution strengthening and dispersion strengthening, and the in-situ synthesized ZrC nanoparticles on nano-carbon surfaces can pin interfaces and improve the effect of load transfer. The synergetic effects and multiple strengthening mechanisms result in the improvement of the microstructure and properties of the composites.</p>

A nano-micro dual-scale particulate-reinforced copper matrix composite with high strength, high electrical conductivity and superior wear resistance

Microstructure and properties of dual-scale particulate reinforced copper matrix composites with superior comprehensive properties

Microstructure and Wear Resistance of Cu/nano-SiC Composite

Progress in Studies of Particle Reinforced Cu-matrix Composites

Microstructure and wear characteristics of in-situ micro/nanoscale niobium carbide reinforced copper composites fabricated through powder metallurgy

A research on the electrical sliding behavior wear of dual-scale particulate reinforced copper matrix composites

Copper Matrix Composites Reinforced with Nanometer Alumina Particle

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Microstructure and performance of electroformed Cu/nano-SiC composite

A high strength and high electrical conductivity copper based composite enhanced by graphene and Al2O3 nanoparticles

Microstructure and property of electroformed nano-Al2O3/Cu composite

Enhanced Mechanical Properties and High Electrical Conductivity in Multiwalled Carbon Nanotubes Reinforced Copper Matrix Nanolaminated Composites

Improving comprehensive performance of copper matrix composite by spray pyrolysis fabricated CNT/W reinforcement

Microstructural Characteristics, Electrical Conductivity and Mechanical Properties of Cu Matrix Composites Reinforced with Dual-Phase Borides

Excellent wear resistance of multicomponent nanocrystalline W‒Cu based composite

A nanodispersion-in-nanograins strategy for ultra-strong, ductile and stable metal nanocomposites

A nanostructured Ag/Cu multilayered composite exhibiting high hardness and high electrical conductivity prepared by a novel multicomponent accumulative roll bonding

Realizing the combination of high strength and good ductility of Cu matrix composites with CrCoNi reinforcement particles and microlaminated structure

Microstructure and mechanical properties of nano-carbon reinforced Mo–Cu–Zr composites

Novel Strength-Electrical Conductivity Synergy in Cu-based Composites Reinforced with TiZrNbTa High Entropy Alloy

High strength and high electrical conductivity Cu composites reinforced by SiO 2 aerogel particles