Abstract:Carbon nanotube field-effect transistor (CNT FET) has been considered as a promising candidate for future high-performance and low-power integrated circuits (ICs) applications owing to its ballistic transport and excellent immunity to short channel effects (SCEs). Still, it easily suffers from the ambipolar property, and severe leakage current at off-state originated from gate-induced drain leakage (GIDL) in CNT FETs with small bandgap. Although some modifications on device structure have been experimentally demonstrated to suppress the leakage current in CNT FETs, there is still a lack of the structure with excellent scalability, which will hamper the development of CNT FETs toward a competitive technology node. Here, we explore how the device geometry design affects the leakage current in CNT FETs, and then propose the possible device structures to suppress off-state current and check their availability through the two-dimensional (2D) TCAD simulations. Among all the proposed structures, the L-shaped-spacer CNT FET exhibits significantly suppressed leakage current and excellent scalability down to sub-50 nm with a simple self-aligned gate process. According to the simulation results, the 50 nm gate-length L-shaped-spacer CNT FET exhibits an off-state current as low as approximately 1 nA/µm and an on-current as high as about 2.1 mA/µm at a supply voltage of −1 V and then can be extended as a universal device structure to suppress leakage current for all the narrow-bandgap semiconductors based FETs.

Leakage Current And Bottom Gate Voltage Considerations In Developing Maximum Performance 16nm N-Channel Carbon Nanotube Transistors

Substrate bias considerations for low leakage 16nm p-channel carbon nanotube transistors

Device and Circuit-Level Performance of Carbon Nanotube Field-Effect Transistor with Benchmarking Against A Nano-Mosfet

Physical Parametric Analysis of 16nm N-Channel Carbon-Nanotube Transistors for Manufacturability

Improving the Performance of Aligned Carbon Nanotube-Based Transistors by Refreshing the Substrate Surface.

Interface States in Gate Stack of Carbon Nanotube Array Transistors.

N-Type Carbon-Nanotube Mosfet Device Profile Optimization For Very Large Scale Integration

Investigation on self-heating effect in carbon nanotube field-effect transistors

Deep Insight into Channel Engineering of Sub-3 Nm-Node P-Type Nanosheet Transistors with a Quantum Transport Model

16nm P-type carbon nanotube MOSFET device profile optimization for high-speed

Self‐Aligned Contact Doping for Performance Enhancement of Low‐Leakage Carbon Nanotube Field Effect Transistors

Electrostatic Engineering of Nanotube Transistors for Improved Performance

Performance Prediction of Graphene Nanoribbon and Carbon Nanotube Transistors

A Compact Virtual-Source Model for Carbon Nanotube Field-Effect Transistors in the Sub-10-nm Regime - Part II Extrinsic Elements, Performance Assessment, and Design Optimization

Suppression of Leakage Current in Carbon Nanotube Field-Effect Transistors

Investigation and Improvement of the Bias Temperature Instability in Carbon Nanotube Transistors

Uniform Carbon Nanotube Diameter and Nanoarray Pitch for VLSI of 16nm P-channel MOSFETs

Drain-engineered Carbon-Nanotube-film Field-Effect Transistors with High Performance and Ultra-Low Current Leakage

Predicted Performance Advantages of Carbon Nanotube Transistors with Doped Nanotubes as Source/Drain

NP dynamic CMOS resurrection with carbon nanotube field effect transistors

A Numerical Study of Scaling Issues for Schottky Barrier Carbon Nanotube Transistors