Abstract:Carbon nanotube field-effect transistors (CNT FETs) have been demonstrated to exhibit high performance only through low-temperature fabrication process and require a low thermal budget to construct monolithic three-dimensional (M3D) integrated circuits (ICs), which have been considered a promising technology to meet the demands of high-bandwidth computing and fully functional integration. However, the lack of high-quality CNT materials at the upper layer and a low-parasitic interlayer dielectric (ILD) makes the reported M3D CNT FETs and ICs unable to provide the predicted high performance. In this work, we demonstrate a multilayer stackable process for M3D integration of high-performance aligned carbon nanotube (A-CNT) transistors and ICs. A low-kappa (similar to 3) interlayer SiO2 layer is prepared from spin-on-glass (SOG) through processes with a highest temperature of 220 C-degrees, presenting low parasitic capacitance between two transistor layers and excellent planarization to offer an ideal surface for the A-CNT and device fabrication process. A high-quality A-CNT film with a carrier mobility of 650 cm(2) V-1 s(-1) is prepared on the ILD layer through a clean transfer process, enabling the upper CNT FETs fabricated with a low-temperature process to exhibit high on-state current (1 mA mu m(-1)) and peak transconductance (0.98 mS mu m(-1)). The bottom A-CNT FETs maintain pristine high performance after undergoing the ILD growth and upper FET fabrication. As a result, 5-stage ring oscillators utilizing the M3D architecture show a gate propagation delay of 17 ps and an active region of approximately 100 mu m(2), representing the fastest and the most compact M3D ICs to date.

Physical Parametric Analysis of 16nm N-Channel Carbon-Nanotube Transistors for Manufacturability

16nm P-type carbon nanotube MOSFET device profile optimization for high-speed

N-Type Carbon-Nanotube Mosfet Device Profile Optimization For Very Large Scale Integration

Device and Circuit-Level Performance of Carbon Nanotube Field-Effect Transistor with Benchmarking Against A Nano-Mosfet

Leakage Current And Bottom Gate Voltage Considerations In Developing Maximum Performance 16nm N-Channel Carbon Nanotube Transistors

Carbon Nanotube Materials for Future Integrated Circuit Applications

Monolithic Three‐dimensional Integration of Aligned Carbon Nanotube Transistors for High‐performance Integrated Circuits

Deep Insight into Channel Engineering of Sub-3 Nm-Node P-Type Nanosheet Transistors with a Quantum Transport Model

Interface States in Gate Stack of Carbon Nanotube Array Transistors.

Uniform Carbon Nanotube Diameter and Nanoarray Pitch for VLSI of 16nm P-channel MOSFETs

Uniform Diameter and Pitch Co-Design of 16nm N-Type Carbon Nanotube Channel Arrays for VLSI

NP dynamic CMOS resurrection with carbon nanotube field effect transistors

Electrostatic Engineering of Nanotube Transistors for Improved Performance

Substrate bias considerations for low leakage 16nm p-channel carbon nanotube transistors

Carbon nanotube-based CMOS transistors and integrated circuits

Scaling of N-Type Field-Effect Transistors Based on Aligned Carbon Nanotube Arrays

Optimization of a Nanoscale Operational Amplifier Based on a Complementary Carbon Nanotube Field-Effect Transistor by Adjusting Physical Parameters

High-performance Doping-Free Carbon-Nanotube-based CMOS Devices and Integrated Circuits

Progress on a Carbon Nanotube Field-Effect Transistor Integrated Circuit: State of the Art, Challenges, and Evolution

A Compact Virtual-Source Model for Carbon Nanotube Field-Effect Transistors in the Sub-10-nm Regime - Part II Extrinsic Elements, Performance Assessment, and Design Optimization

Complementary carbon nanotube metal–oxide–semiconductor field-effect transistors with localized solid-state extension doping