Abstract:Silica glass ingot synthesis by flame hydrolysis deposition (FHD) is an important approach to obtain high-purity synthetic silica glass with high refractive index homogeneity. Using the precursor of silicon tetrachloride (SiCI4), the silica ingot (SiO2) can be synthesized in the oxy-hydrogen diffusion flame through a set of kinetic reactions and subsequent cooling. The homogeneity of the synthetic silica glass is influenced by the temperature/diameter equality of silica droplets and the residue of radicals (e.g. OH) in the synthetic silica. In this study, the mixing system of oxy-hydrogen diffusion flame and silica droplets in a furnace were modeled by a Euler-Lagrange multi-phase model, where the interphase exchange of mass, momentum and energy between the gas phase molecules and liquid phase silica droplets during the formation and transportation of silica droplets were included. The silica droplets were tracked by a Lagrangian formulation that includes the discrete phase inertia, hydrodynamic drag, the force of gravity and the dispersion due to turbulent eddies. The molecular gas phase reactions are described by a simple kinetic mechanism involving the major species during the formation of molecular SiO2, with kinetic and thermodynamic parameters taken from the literature when available.The effect of initial equivalence ratio on the flame structure was analyzed in the study, where the high-temperature region is uniform over the glass ingot and the residue is limited at unity equivalence ratio. The probability distributions of silica droplet diameter and temperature were analyzed by employing a developed droplet growth model, where the condensation rate is controlled by the in situ SiO2 vapor concentration and the local flow-condition-determined mass transfer rate. The maximum diameter of silica droplets in the furnace is 1.39 x 10(-4) m, and the percentage of silica droplets decreases with the increasing of diameter. Two high probability regions were observed for the droplet temperature distribution, the temperature below 1500 K accounts for 40% of the total droplet number, and the temperature range between 3500 and 4500 K accounts for 58%. The droplet diameter on the ingot cap distributes in the range from 4 x 10(-5) to 9 x 10-5 m with approximately probability of 85%. The distribution of droplet temperature on the ingot cap is much uniform, with more than half (67%) of the droplets has the temperature between 3100 and 3200 K. (C) 2014 Elsevier Ltd. All rights reserved.

A Model for Distribution of Oxygen in Multicrystalline Silicon Ingot Grown by Directional Solidification

Numerical Simulation of Directional Solidification Process for the Polycrystalline Silicon Ingot

Oxygen-related Centers in Multicrystalline Silicon

The Annealing Behavior of Oxygen in Cast Multicrystalline Silicon

The dislocation distribution characteristics of a multi-crystalline silicon ingot and its impact on the cell efficiency

Investigation of Oxygen Behavior under Different Melt Flow, Diffusion Boundary Layer, and Crystal-Melt Interface in a 300 mm Silicon Crystal Growth with Cusp Magnetic Field

Thermodynamic Analysis of Dissolved Oxygen in a Silicon Melt and the Effect of Processing Parameters on the Oxygen Distribution in Single-crystal Silicon During Czochralski Growth

Oxygen Annealing Behavior in Multicrystalline Silicon

Investigation of Impurities Distribution on the mc-Si Ingot Grown by the Silicon Nitride Coated Carbon Crucible: Numerical Simulation

Oxygen and Carbon Precipitation in Multicrystalline Solar Silicon

Numerical and experimental investigation of octagonal thermal field for improving multi-crystalline silicon ingot quality

Influence of Radiation Heat Transfer on Mc-Si Ingot during Directional Solidification: A Numerical Investigation

Effects of impurities and defects on the distribution of minority carrier lifetime in multi-crystalline silicon

Analysis of the formation of interweaved strips in cast quasi-single crystal silicon ingots

Characterization of the Interface Region During the Agglomeration of Silicon Nanocrystals in Silicon Dioxide

Effect of melt flow on impurity distribution in directional solidification of silicon solar cells

Oxygen and Nitrogen Transfer in Furnaces in Crystal Growth of Silicon by Czochralski and Directional Solidification Processes

Modeling Analysis on the Silica Glass Synthesis in A Hydrogen Diffusion Flame

Oxygen Diffusion in Silicon: The Influence of Hydrogen

Influence of Inner Crucible Radius Variation on the Thermal Field and Oxygen Transport in the Melt During the Growth of Silicon by Continuous Czochralski Method

Radial Distribution of Grown-In Oxygen Precipitates in a 300mm Nitrogen-Doped Czochralski Silicon Wafer