Abstract:The segregation effect of phosphorus during the Czochralski growth of large-size n-type monocrystalline silicon contributes to the poor uniformity of radial resistivitys which directly affects the local electrical properties of the photovoltaic device. In the current work, a two-dimensional unsteady model was adopted to investigate the numerical simulation of the growth process of 300 mm industrial Czochralski silicon single crystal. Combined with the fluid flow, heat transfer and mass transfer models, investigation on the distribution of phosphorus impurities at the crystal/melt interface was performed, moreover the contribution of melt circulation flow to the two-phase segregation of phosphorus impurities was also thoroughly studied. The experimental results indicate that, with the increase of the crystal rotation, the circulation in the melt at the solid-liquid interface increases simultaneously, and the phosphorus impurities tend to be more uniform. With increasing crucible rotation, the circulation in the melt at the solid-liquid interface becomes smaller and the phosphorus impurities tend to be uneven. The simulation results show that the optimum crucible speed is 5 rpm. The inhomogeneity of phosphorus impurities in the melt at the solid-liquid interface increases first and then decreases with the increase of the casting speed. The combination of high crystal rotation and low crucible rotation is beneficial for the radial distribution uniformity of phosphorus impurities in the crystal. The accuracy of the model is verified by combining with the experiments, which provides a theoretical basis for large scale industrial production.

Effect of melt flow on impurity distribution in directional solidification of silicon solar cells

Numerical Simulation of Directional Solidification Process for the Polycrystalline Silicon Ingot

Influence of Crystal Growth Rate on the Thermal Field in a Directional Solidification Process for Silicon Solar Cells

MD Simulation and Transport Property Analysis of Silicon in High-Temperature Molten Fluoride Salts Electrolyte

Effect of Heat Transfer During the Vacuum Directional Solidification Process on the Crystal Quality of Multicrystalline Silicon

Effects of Argon Flow on Impurities Transport in a Directional Solidification Furnace for Silicon Solar Cells

Experimental Study Of 3d Solid-Liquid Interfaces And Their Influence On Directional Solidification Silicon Ingot

Simulation analysis of point defects in a silicon ingot during a unidirectional solidification process for solar cells

Effects of argon flow on melt convection and interface shape in a directional solidification process for an industrial-size solar silicon ingot

Heat and Impurity Transfer Mechanisms of Czochralski and Directional Solidification Processes

Effect of impurity phase migration on Al-30wt.%Si solvent refining with Zr additions during directional solidification

Simulation Analysis of Point Defects in Silicon Ingot During Unidirectional Solidification Process for Solar Cells

Numerical and Experimental Study of Vacuum Directional Solidification Purification Process for Sog-Si in Metallurgical Route

In situ observation and numerical analysis of temperature gradient effects on growth velocity during directional solidification of silicon

Distribution and propagation of dislocation defects in quasi-single crystalline silicon ingots cast by the directional solidification method

Effect of Silicon Nitride Coated Carbon Crucible on Multi-Crystalline Silicon Ingot during Directional Solidification Process: Numerical Simulation

Influence of Radiation Heat Transfer on Mc-Si Ingot during Directional Solidification: A Numerical Investigation

Structure Characteristic and Defects Controlling in Cold Crucible Directional Solidification of Multicrystalline Silicon for Solar cells

Study on the Effect of Melt Flow Behavior on the Uniformity of Phosphorus Doping During the Growth of Large-Size N-Type Monocrystalline Silicon by Czochralski Method

Effect of melt flow rate and S/L interface on the P horizontal distribution in silicon

Control of Melt Flow and Oxygen Distribution Using Traveling Magnetic Field During Directional Solidification of Silicon Ingots