Abstract:Segregation of the solidification structure of an immiscible alloy is related to the convection induced by the density differences of the components under gravity during solidification. Here, the solidification of the Al–Bi alloy in both opposing and parallel directions to the gravity force was investigated in situ using radiography and optical flow techniques. A quantitative analysis was performed on the flow, solute, and constitutional undercooling fields at the interface. During upward solidification, a flat solute-enriched layer was observed, with the melt flowing toward the center from both sides of the interface. During downward solidification, the solute-enriched layer was deformed, and solute plumes were observed, with the melt flowing toward the sides from the center of the interface. A high solute concentration gradient enhances the local flow and solute transport. The elongation of the plumes was attributed not only to the convective diffusion of the solute but also to the dispersion of droplet clusters. The forces acting on the droplets were calculated, and it was found that the resultant force on the droplets increased the area of the solute-enriched layer. Convection within the bulk melt and the motion of the droplets have synergistic effects on the flow pattern and solute distribution. Distinct microstructures were observed in opposite directions of solidification owing to the differences in constitutional undercooling and flow instability. This work offers insights into the quantitative measurement and understanding of the multi-physics fields during the solidification process.

Effect of impurity phase migration on Al-30wt.%Si solvent refining with Zr additions during directional solidification

Mechanism of boron removal of primary Si phases and morphology evolution of impurity phases during slow cooling solidification refining of Al-30wt.%Si alloy with Zr additions

Impurity phases and their removal in Si purification with Al–Si alloy using transition metals as additives

Possibility of Complete Collecting Eutectic Si and Primary Si as Purified Si During Al-Si Solvent Refining with Zr Additions

Impurity Effects on the Solidification of Primary Al3(Sc,Zr) Phase in Al Alloys

Phase-Field Modeling of Solute Trapping in Single-Phase Alloys During Directional Solidification

Effects of solidification rate on the leaching behavior of metallic impurities in metallurgical grade silicon

Effect of melt flow on impurity distribution in directional solidification of silicon solar cells

Effect of Si Content on the Morphology Evolution of the Si Primary Dendrites in Al-Si Alloy Solvent Refining Process

Segregation and Morphological Evolution of Si Phase during Electromagnetic Directional Solidification of Hypereutectic Al-Si Alloys

Exploring the Local Structure of Molten Al-Zr-Y(Si) Alloys Using Ab Initio Molecular Dynamics

In situ analysis of solute and flow fields in directional solidification of immiscible Al–Bi alloy

Mechanism of ZrB2 Formation in Al–Si Alloy and Application in Si Purification

Enhancing P removal from primary Si by P-containing Al2Si2Sr phase during Al–Si solvent refining

Research Advance in Removal of Impurity Si from Molten Al and Al Alloys

Effects of Si solution in θ-Al13Fe4 on phase transformation between Fe-containing intermetallic compounds in Al alloys

Efficient separation of bulk Si and enhanced B removal by Si–Sn–Cu ternary solvent refining with Zr addition

Effect of strontium and melt purification on the solidification microstructure of hypereutectic Al-Si alloys

Characterization of Al3Zr precipitation via double-step homogenization and recrystallization behavior after subsequent deformation in 2195 Al-Li alloy

Macro Segregation Formation Mechanism of the Primary Silicon Phase in Directionally Solidified Al–Si Hypereutectic Alloys under the Impact of Electric Currents

Removal of Impurities from Metallurgical Grade Silicon During Ga-Si Solvent Refining