Abstract:Solar grade silicon (SoG-Si) is the core material of solar cells. The removal of boron (B) has always been a challenge in the preparation of high purity Si. Slag refining has always been considered as one of the effective methods to remove B, but the design of refined slag has been limited by the cognition of the relationship between slag structure and impurity removal, and can only rely on the apparent basicity and oxygen potential adjustment of slag based on a large number of conditional experiments. In order to clarify the B removal mechanism of slag refining from Si, nuclear magnetic resonance (NMR) and Raman vibrational spectroscopy were used to investigate in detail the behavior and state of B and aluminum (Al) in the SiO2–CaO–Al2O3–B2O3 slag. The role of the degree of B–Si cross linking on the B activity in slag was highlighted by comparing the partition ratio (LB) between slag and Si. Q2 structural unit of slag is an important site for capturing B. BO4 (1B, 3Si) species is the main form of connection between B and silicate networks, which determines the activity of B in the slag. The addition of Al2O3 into SiO2–CaO slag can change the relative fraction of Q2 and BO4 (1B, 3Si). Increasing Al2O3 content from 0 to about 20 wt% can lead to the overall increase of Q2 population, and a tendency to decrease first and then increase of BO4 (1B, 3Si) fraction under both basicity conditions (0.6 and 1.1). When Al2O3 content is less than 10 ± 1 wt%, the decrease of BO4 (1B, 3Si) population plays a major role in deteriorating the connectivity between B and aluminosilicate network, which leads to a higher activity of B. When the Al2O3 content is greater than 10 ± 1 wt%, B is incorporated into the silicate network more easily due to the formation of more Q2 and BO4 (1B, 3Si), which contributes to a rapid decline in activity of B in slag.

Mechanism of boron removal of primary Si phases and morphology evolution of impurity phases during slow cooling solidification refining of Al-30wt.%Si alloy with Zr additions

Mechanism of ZrB2 Formation in Al–Si Alloy and Application in Si Purification

Effect of impurity phase migration on Al-30wt.%Si solvent refining with Zr additions during directional solidification

Possibility of Complete Collecting Eutectic Si and Primary Si as Purified Si During Al-Si Solvent Refining with Zr Additions

Impurity phases and their removal in Si purification with Al–Si alloy using transition metals as additives

Efficient separation of bulk Si and enhanced B removal by Si–Sn–Cu ternary solvent refining with Zr addition

Enhanced boron removal by CrMnFeNi-based high-entropy alloys during purification of silicon

Enhancing P removal from primary Si by P-containing Al2Si2Sr phase during Al–Si solvent refining

Refinement of primary Si in Al–20%Si alloy by MRB through phosphorus additions

Purification of metallurgical-grade silicon using Si–Sn alloy in presence of Hf, Zr, or Ti

Exploring the Local Structure of Molten Al-Zr-Y(Si) Alloys Using Ab Initio Molecular Dynamics

Effect of Si Content on the Morphology Evolution of the Si Primary Dendrites in Al-Si Alloy Solvent Refining Process

Achieving superior grain refinement efficiency for Al–Si casting alloys through a novel Al–La–B grain refiner

Removal of Impurities from Metallurgical Grade Silicon During Ga-Si Solvent Refining

The Multi-Scale Microstructure and Strengthening Mechanisms of Mo-12Si-8.5BxZr (at.%) Alloys

Achieving Grain Refinement of Α-Al and Si Modification Simultaneously by La‒B‒Sr Addition in Al‒10Si Alloys

Heterogenous Grain Nucleation in Al-Si Alloys: Types of Nucleant Inoculation

Formation Mechanism and Effect on the Mechanical Properties of TiSi Phase for Ti-5Al-5Mo-5Cr-3Nb-2Zr Alloyed by Silicon

Design of Refining Slag Based on Structural Modifications Associated with the Boron Removal for SoG-Si

Oxide unlocking electron beam melting to separate boron for impurities co-removal of metallurgical grade silicon

Microstructure and mechanical properties of Nb 16Si alloys with Zr additions