Abstract:The shell and tube heat exchanger has been widely used in the chemical industry. However, because of complex operating conditions, the heat exchanger tubes sometimes are leaked. This paper conducted in-depth failure analysis on abnormal leakage of several tubes of a shell and tube heat exchanger, which had been used for nine years in a methyl methacrylate production facility. In order to find out the root cause of the failure, chemical analysis, metallographic structure inspection and morphology observation of the leakage tubes were carried out. The composition and properties of the tube scales were analyzed by X-ray fluorescence spectroscopic analysis (XRF), X-ray diffraction analysis (XRD), thermogravimetric analysis (TGA), and energy spectrum analysis (EDS). The micro-zone features of the leaked tubes were observed with three-dimensional stereo microscope (3D-SM) and scanning electron microscope (SEM). According to the testing results and the actual operating conditions of the heat exchanger, the root cause of abnormal leakage of the tubes was finally determined. The key finding was that the terephthalic acid gas was suddenly desublimated into solid particles while its temperature was about 300 degrees C. Thus, the gas containing terephthalic acid particles caused erosion wear, abrasive wear and local corrosion onto the inlet side of the heat exchanger, leading to abnormal leakage of the tubes. Finally, some suggestions were put forward for the heat exchanger, which were also conducive to the safe operation and failure prevention of similar equipment.

Failure Analysis of Stainless Steel Gate Valve in Ammonium Phosphate Solution

Failure Analysis of Ball Valve Made of Stainless Steel in Ammonium Phosphate Solution

Study on Leakage Reasons of Gate Valve in Ammonium Phosphate Solution

Failure Analysis on Wear of Stopcock in Alkali Solution

Fracture failure analysis on Alloy783 bolts in medium-pressure valve bonnets of USC units

Failure analysis on synergistic effect of erosion and corrosion on failed fittings in specialty chemical plant. Part II: Control valve

Failure analysis on fracture causes of stainless-steel studs in seawater system of nuclear power plants

Study on corrosion behavior of 13Cr gate valve using weld deposited gate and seat in well operation environments

Failure Analysis on Abnormal Leakage of TP321 Stainless Steel Pipe in Hydrogen-Eliminated System of Nuclear Power Plant

Corrosion Failure of Stainless Steel Tube During Storage

Failure analysis of heat exchange tubes in hydrogenation unit

Failure Analysis on Abnormal Leakage of TP321 Stainless Steel Pipe of Medium Temperature Shifting Gas in Hydrogen Production System

Failure Analysis on Water Wall Tube Burst of Heating Furnace

Failure Analysis on Corrosion of Refeed Valve Manhole Door in Circulating Fluidized Bed Boiler

Failure Analysis on Abnormal Leakage of Shell and Tube Heat Exchanger in Specialty Chemical Plant

CORROSION BEHAVIOR OF SUPER-AUSTENITIC STAINLESS STEEL AL-6XN IN SUPERCRITICAL WATER

Corrosion of Stainless Steel Valves in a Reverse Osmosis System: Analysis of Corrosion Products and Metal Loss

Failure analysis of 2205 duplex stainless steel connecting pipe for composite plate pressure vessel in a high pressure gas field

Failure Analysis of the High Nitrogen Austenitic Stainless-Steel Boiler Tank Weldments

Failure Analysis of Leakage on Titanium Tubes Within Heat Exchangers in a Nuclear Power Plant. Part II: Mechanical Degradation

Analysis of Causes and Protective Measures against Corrosion Perforation in the Shell-Side Outlet Flange of a Sour Water Steam Heater