Abstract:Overheating, corrosive degradation, hydrogen embrittlement, creep, erosion, and corrosion are the cause of most failure problems in fire tubes. Herein, we have evaluated the macrostructural, microstructural, and mechanical properties at welded U-bend of the fractured fire tube to analyze the failure of the SA 387 grade 22 steel heater treater fire tube that has been under continuous use for 18 years at an oil refinery. We have found that the embrittlement factor at U-bend proved to be the most significant factor in its failure. The embrittlement X factor for weld metal is 45, which is three times more than the recommended value (≤15). It is apprehended that the fractured metal part could be susceptible to temper embrittlement. There is a significant higher hardness value of weld metal as compared to base metal, which is due to metallic phase transition at high temperature. The Charpy impact energy absorbed by the fractured metal is 13 J, which is lower than impact energy absorbed by the base metal 300 J. The macroscopic examination reveals that the crack initiated on the emulsion side and propagated radially in welded U-bend before extending further into the base metal in the axial direction. The scanning electron microscopy demonstrated intergranular crack propagation, discontinuous cracking along grain boundaries, and blunted cracks at grain interiors. The fractography is performed on the fracture surface of the impact test specimens, and it indicated heavily cavitated intergranular facets along the grain boundaries and deep secondary cracks on the fracture surface. Energy disperse spectroscopy identified the carbides formation at the U-bend cracking parts, which counter confirm the microstructural phase transition. These findings suggested that the severe cracking observed in the fire tube at the U-bend is likely due to temper embrittlement (TE) induced by exposure of the fire tube material to elevated temperatures.

Failure Analysis on Water Wall Tube Burst of Heating Furnace

Cause Analyses of the Weld Seam Cracks of a Prehydrogenating Reactor

Overheating and Failure Analysis on the Fire Tube of Heating Furnace after Scaling

FAILURE ANALYSIS OF BOILER TUBE

Experimental and simulative failure analysis of reformer furnace outlet manifolds serviced in aromatic plant

Failure Analysis on Unexpected Fracture of the Hydraulic Expansion Mandrel for Tube to Tubesheet Expanding in the Steam Generator of Nuclear Power Plant

Cause and mechanism analysis of cracking and leakage of water wall tube

Corrosion Failure Analysis for Heat Transfer Tube in Quick Cooled Oil-Dilute Steam Heat Exchanger

Failure Analysis on Abnormal Leakage of Shell and Tube Heat Exchanger in Specialty Chemical Plant

Failure Analysis of Bursting on the Inner Pipe of A Jacketed Pipe in A Tubular Heat Exchanger

Failure analysis of sulphidation-oxidation corrosion of Incoloy 800HT superheater tube

Failure Analysis of Leakage Occurred in Tee in Steam Pipeline Connected to Heating Furnace

Failure analysis of reheater tubes in a 350 MW supercritical circulating fluidized bed boiler

Failure Analysis on Abnormal Bursting of Heat Transfer Tubes in Spiral-Wound Heat Exchanger for Nuclear Power Plant

Failure analysis of oil refinery heater treater's fractured fire tube

Failure Analysis on Corrosion of Refeed Valve Manhole Door in Circulating Fluidized Bed Boiler

Leakage of water-cooled wall tube in subcritical boiler

Failure Analysis on Abnormal Corrosion of Economizer Tubes in a Waste Heat Boiler

Failure Analysis of an Elbow Tube Break in a Pyrolysis Furnace

Failure analysis of a rapid quench boiler for ethylene cracker

Fracture analysis of tube boiler for physical explosion accident