Abstract:Double-pipe heat exchangers are widely used in the high-pressure and high-temperature applications for their simple and tight tube-in-tube configuration, but therefore normal and stable operation of such pressure-bearing equipment turns to be of greater significance because potential safety risks and economic losses will be aroused if failures occur on them. To deal with this issue, abundant researches have been conducted so far, however most of them focused on the flow and fluid characteristics by numerical simulation and experimental verification, while little attention was paid to the actual cases from the engineering practice. In this paper, such an actual failure case study concerning leakage on the jacket pipe of one double-pipe heat exchanger in a high-pressure polyethylene facility is addressed. In order to find out the causes of this failure, investigation including materials inspection, chemical phase analysis, microscopic morphologies observation, micro-area chemical compositions detection and finite element analysis etc. was carried out. The results indicated that the leakage was firstly induced by the uniform corrosion and the under-deposit corrosion successively, and then stimulated by the effect of erosion from the complicated fluid characteristics around the tee structure. Finally, the related mechanisms of this synergistic effect between corrosion and erosion were discussed, and the pertinent countermeasures from both design and maintenance point of view were proposed, including descaling of the fouled inner pipe, improvement of the circulation cooling water quality, and upgrading of the pipe materials etc. Achievement of this paper will supplement the failure cases database of double-pipe heat exchangers, based on which design optimization and failure prevention will be possible.

Failure Analysis of Leakage Occurred in Tee in Steam Pipeline Connected to Heating Furnace

Analysis and Repair of Cracks in Welding Tee of Main Steam Pipelines in Thermal Power Units

Root Causes Analysis and Countermeasures on Unexpected Perforation of Tee Pipe in the Steam System of Specialty Chemical Plant

Cause Analysis and Improvement Measures for Pipeline Cracking of 9Cr-1Mo Material

Failure Analysis on Water Wall Tube Burst of Heating Furnace

Cause Analyses of the Weld Seam Cracks of a Prehydrogenating Reactor

Overheating and Failure Analysis on the Fire Tube of Heating Furnace after Scaling

Flow enhanced corrosion of tee in gas transmission pipeline

FAILURE ANALYSIS OF BOILER TUBE

Failture Analysis of Welded Joint on Superheater of a 670t/h Boiler

Cause Analysis of Leakage Failure of Seamless Steel Pipe during Pipeline Pressure Test

Failure Analysis on Leaked Jacket Pipe of Double-Pipe Heat Exchanger in High-Pressure Polyethylene Facility

Failure analysis of fillet weld crack in linepipe

Study on Stress Intensity of Welding Parts of Small Dlameter Tube to Reheater in Coal-burning Thermo-electric Factory with 200 MW Power

FAILURE ANALYSIS OF SKID PIPE LEAKS IN WALKING BEAM TYPE REHEATING FURNACE APPLICATIONS

Failure Analysis on Abnormal Leakage of TP321 Stainless Steel Pipe of Medium Temperature Shifting Gas in Hydrogen Production System

Safety Testing and Analysis of the Header of the Drawn Boiler with a Small Diameter and a Large Wall Thickness

Failure Analysis on Abnormal Leakage of Shell and Tube Heat Exchanger in Specialty Chemical Plant

Cause and mechanism analysis of cracking and leakage of water wall tube

Failure Analysis on Unexpected Fracture of the Hydraulic Expansion Mandrel for Tube to Tubesheet Expanding in the Steam Generator of Nuclear Power Plant

Failure Analysis of Girth Weld Cracking in Gas Transmission Pipelines Subjected to Ground Subsidence and Traffic Loads