Abstract:Abstract Hydrogen, as one of the crucial carriers in achieving the green and low-carbon transition, plays a significant role in a multi-energy structure. Among the existing hydrogen transportation methods, the transportation of hydrogen in the form of hydrogen-blended natural gas through the existing urban natural gas pipeline network is an effective way to enhance transportation efficiency and substantially reduce costs. However, when hydrogen comes into contact with the metal materials of natural gas pipelines, it can lead to hydrogen embrittlement, resulting in a deterioration of the mechanical properties of the metal materials and even causing significant accidents. Notably, the welded joint area of gas pipelines is widely recognized as the vulnerable link in pipeline transportation systems because the microstructure and mechanical properties of the welded joint area differ significantly from those of the pipeline steel base material, making it the most susceptible site for hydrogen embrittlement-induced failure. In this study, using 20# steel as the research subject, specimens were taken from the vertical weld seam in its welded joint area. The slow strain rate tensile test, low cycle fatigue test and fatigue crack growth test under hydrogen environment were carried out to explore the variation of mechanical properties under different working conditions. The results demonstrate that with an increase in hydrogen content, the yield strength and tensile strength of the welded joint in 20# steel decrease slightly, resulting in a deterioration of mechanical properties. The elongation and reduction of area after fracture decrease, indicating reduced material plasticity and an intensified degree of hydrogen embrittlement. With the addition of hydrogen, the overall low cycle fatigue life of specimens decreases. The relative fatigue life for the three materials are 74.22%, 62.02%, and 46.05%, demonstrating a noticeable decline in fatigue performance. Hydrogen significantly increases the fatigue crack growth rate in the weld zone of 20# steel. At a hydrogen addition of 10vol%, the fatigue crack growth rate is already approximately 12 times higher than that in the reference environment with 0vol% hydrogen. Simultaneously, with the increase of hydrogen content, the fatigue crack growth rate and the degree of deterioration both escalate, and the deterioration indexes are all above 90 %. The research findings can be utilized to assess the compatibility of gas pipeline welded joints in a hydrogen environment.

Failure Analysis on Abnormal Leakage of TP321 Stainless Steel Pipe of Medium Temperature Shifting Gas in Hydrogen Production System

Failure Analysis on Abnormal Leakage of TP321 Stainless Steel Pipe in Hydrogen-Eliminated System of Nuclear Power Plant

Cause Analyses of the Weld Seam Cracks of a Prehydrogenating Reactor

Failure analysis of heat exchange tubes in hydrogenation unit

Failure analysis of abnormal leakage in hydrogen cyanide reactor

Failure analysis of 316L stainless steel corrugated pipe

Failure Analysis on Abnormal Leakage of Shell and Tube Heat Exchanger in Specialty Chemical Plant

Analysis of Causes and Protective Measures against Corrosion Perforation in the Shell-Side Outlet Flange of a Sour Water Steam Heater

Analysis and investigation of the leakage failure on the shale gas gathering and transmission pipeline

Failure analysis of 2205 duplex stainless steel connecting pipe for composite plate pressure vessel in a high pressure gas field

Comparative Study on Hydrogen Embrittlement Susceptibility in Heat-Affected Zone of TP321 Stainless Steel

Failure Analysis on Leaked Jacket Pipe of Double-Pipe Heat Exchanger in High-Pressure Polyethylene Facility

Corrosion Failure Analyses of 20 Steel Pipeline for Hydrogen Transportation in Swampland

Perforation failure analysis of pipeline elbow at a receiving station

Failure Analysis of Cracked P110 Repaired Tubing Used for Gas Transmission

Failure analysis of corrosion at an inhomogeneous welded joint in a natural gas gathering pipeline considering the combined action of multiple factors

Damage and cracking of hydrogenation pipelines suffered from thermal fatigue

Root Causes Analysis and Countermeasures on Unexpected Perforation of Tee Pipe in the Steam System of Specialty Chemical Plant

Failure of a high-pressure flash gas pipeline from coal coke gasification to the cleaning section due to hydrogen-induced cracking

Failure Analysis of A Pipeline in Sour Gas Field

Study on Compatibility Assessment of Urban Natural Gas Pipeline Welded Joints under Hydrogen Environment