Abstract:Corrosion defects in steel pipes can lead to pipeline failure, and such failures can have severe impacts; thus, developing appropriate corrosion mitigation schemes to prevent them can be beneficial. To this end, the influences of variables such as the depth, length, and group spacing of corrosion defects on the failure of X80 steel pipes containing group corrosion defects were analysed in this study. Abaqus, a simulation software, was used for non-linear finite element analyses, and 52 groups corresponding to corrosions under different geometric factors were prepared. Furthermore, a pipeline failure pressure prediction model was established using 138 sets of simulations to determine the maximum von Mises stresses of pipelines subjected to internal pressures under different working conditions. Actual blast test data and error comparisons with various existing evaluation standards were conducted to verify the accuracy of the proposed model. The results revealed that an increase in the internal pressure and the changes in the depth, length, and group spacing of group corrosion defects impact the maximum von Mises stress in the pipe. Among the group corrosion defects considered, the depth of the deepest defect was found to be the most critical factor in determining the form of damage and the failure pressure of pipes containing corrosion defects. The length of corrosion defects and the axial spacing between groups of defects were found to be the secondary factors that affect the failure pressure. In an actual pipeline, group corrosion defects are expected to cause a reduction in the wall thickness and, thus, pose a threat to safety, an issue that warrants substantial attention. The results of this work can serve as a reference for assessing the failure of X80 steel pipelines containing group corrosion defects.

Failure Analysis on Abnormal Perforation of Super Large Diameter Buried Gas Pipeline Nearby Metro

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

A Simplified Analytical Solution of Pipeline Response under Normal Faulting

Failure Prediction and Reliability Analysis of Buried Grey Cast Iron Water Mains Considering Corrosion

Perforation failure analysis of pipeline elbow at a receiving station

Failure Analysis on Leakage and Perforation of Natural Gas Pipeline

Failure analysis of local effusion corrosion in small diameter gas pipeline: Experiment and numerical

Analysis and investigation of the leakage failure on the shale gas gathering and transmission pipeline

Failure analysis in buried ductile iron pipelines: A study of leakage in drinking water distribution systems

Insights into the perforation of the L360M pipeline in the liquefied natural gas transmission process

Failure analysis of leaking firefighting pipeline used in nuclear power plant: Corrosion development process and key influence factors

Failure Analysis of A Pipeline in Sour Gas Field

Failure Analysis of Girth Weld Cracking in Gas Transmission Pipelines Subjected to Ground Subsidence and Traffic Loads

Unraveling mechanisms and failures of stray current corrosion in urban Subway adjacent pipeline networks through statistical insights and 3D simulation

Failure Analysis of High-pressure Gas Pipeline Under the Condition of Geologic Hazards

Mechanical model and probability analysis of buried pipelines failure under uniform corrosion

Root cause analysis of cracking in buried X80 natural gas pipelines

Reliability analysis of gas pipeline with corrosion defect based on finite element method

Safety and reliability assessment of external corrosion defects assessment of buried pipelines—soil interface: A mechanisms and FE study

Evaluating Fitness-for-Service of Corroded Metal Pipelines: Structural Reliability Bases

Finite element analysis of the failure of high-strength steel pipelines containing group corrosion defects