Abstract:A gathering pipeline in a gas field in Northeast China transporting mainly natural gas and also some water and sands was welded using two 20G pipes with different wall thicknesses. The internal corrosion of this pipeline was inhomogeneous. The unequal wall thickness welded joint suffered more serious corrosion damage than did other parts of the pipe and was found to fail during routine maintenance. In this paper, the corrosion damage at this joint was studied based on inhomogeneity. Internal and external factors affecting corrosion, such as the mechanical and electrochemical properties of materials, stress distribution at the joint, and the flow condition in the pipe, and their combined action were investigated. Failure attribution was performed on this basis. Specifically, a hardness test was conducted on different zones of the joint, including the base metal (BM), heat-affected zone (HAZ) and weld metal (WM), to investigate the abrasive wear resistance at the joint. Microstructures of the three zones were characterized by optical microscopy. The morphology and composition of the corrosion film covering the inner surface of the welded joint were characterized by scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS) and X-ray powder diffraction (XRD). Potentiodynamic polarization experiments and electrochemical impedance spectroscopy (EIS) were conducted on samples from the three zones to investigate their electrochemical performances. Moreover, a computational fluid dynamics (CFD) analysis was performed to obtain the flow condition near the joint, and a finite element method (FEM) was used to calculate the stress distribution at the joint. The results showed that the internal corrosion mechanism of the pipeline was CO2 corrosion accelerated by detrimental Cl−. The geometric discontinuity of the welded joint was the main cause of the accelerated corrosion damage at the joint. The change in wall thickness of the welded pipe not only produced gas vortices but also led to stress concentration. Both of these conditions can further accelerate corrosion by destroying the protectiveness of the corrosion film. It is suggested that the corrosion can be prevented by eliminating the inhomogeneities of fluid flow and stress distribution.

Failure Analysis on Leakage and Perforation of Natural Gas Pipeline

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Failure analysis of local effusion corrosion in small diameter gas pipeline: Experiment and numerical

Failure Analysis on Abnormal Perforation of Super Large Diameter Buried Gas Pipeline Nearby Metro

Analysis and investigation of the leakage failure on the shale gas gathering and transmission pipeline

Failure analysis of CO2 corrosion of natural gas pipeline under flowing conditions

Failure Analysis of A Pipeline in Sour Gas Field

Perforation failure analysis of pipeline elbow at a receiving station

Failure analysis of corrosion at an inhomogeneous welded joint in a natural gas gathering pipeline considering the combined action of multiple factors

Insights into the perforation of the L360M pipeline in the liquefied natural gas transmission process

Fatigue failure analysis of dented pipeline and simulation calculation

Failure Patterns in Layered Gas-Storage Systems

Numerical Simulation for Perforation-Caused Leakage Diffusion of Buried Gas Pipeline

Analysis of Transient Flow Model and Leakage Detection Algorithm of Gas Straight Pipeline

Numerical Investigation of the Leakage Flow from a Pressurized CO2 Pipeline

Analysis of Internal Corrosion of Supercritical CO2 Pipeline

Failure Causes Analysis of Circumferential Cracking on Gathering Pipeline in M Oil and Gas Field

Erosion-Corrosion Of A Carbon Steel Elbow In A Natural Gas Gathering Pipeline

A study on decompression wave propagation characteristics during CO2 pipeline leakage with consideration of gas‐liquid transition

Study on Failure Behavior of Gas Well Tubing Under CO 2 Corrosion After Erosion

Analysis of the corrosion failure causes of shale gas surface pipelines