Abstract:The long-term stagnation in metal water supply pipes, usually caused by intermittent consumption patterns, will cause significant iron release and water quality deterioration, especially at the terminus of pipelines. Another common phenomenon at the terminus of pipelines is leakage, which is considered helpful by allowing seepage of low-quality drinking water resulting from long-term stagnation. In this study, the effect of laminar flow on alleviating water quality deterioration under different leakage conditions was investigated, and the potential thresholds of the flow rate, which can affect the iron release process, were discussed. Based on a galvanized pipe and ductile cast iron pipe pilot platform, which was established at the terminus of pipelines, this research was carried out by setting a series of leakage rate gradients to analyze the influence of different leakage flow rates on iron release, as well as the relationship with chemical and biological parameters. The results showed that the water quality parameters were obviously influenced by the change in flow velocity. Water quality was gradually improved with an increase in flow velocity, but its change regularity reflected a diversity under different flow rates (p < 0.05). The iron release was remarkably correlated to the redox potential, dissolved oxygen, pH, iron-oxidized bacteria and sulfate-reducing bacteria. The cumulative total iron release (r = 0.587, p < 0.05) and total iron release rate (r = 0.71, p < 0.022) were significantly influenced by the changes in flow velocity. In short, they tended first to increase and then to decrease with an increasing flow velocity with the threshold as approximately 40% of the critical laminar flow velocity (1.16 × 10−3 m/s). For the pipes at the terminus of the drinking water distribution system, when the bulk water was at the critical laminar flow velocity, the concentration of total iron, the quantity and rate of total iron release remain relatively in an ideal and safe situation.

Failure analysis in buried ductile iron pipelines: A study of leakage in drinking water distribution systems

Failure Prediction and Reliability Analysis of Buried Grey Cast Iron Water Mains Considering Corrosion

Failure Prediction Model and Influence Parameter Analysis of Buried Cast Iron Water Mains

Change regularity of water quality parameters in leakage flow conditions and their relationship with iron release.

Iron Corrosion in Occluded Water in Drinking Water Distribution Systems

Lessons Learned from Large-Diameter Pipe Failure Case Studies

Corrosion Mechanisms of Ductile Iron Pipes in Water Distribution System: Impacts of Ionic Strength and Cement Mortar Lining Coverage

Corrosion Failure Analysis on Water Pipeline

Corrosion behavior and mechanism of ductile iron with different degrees of deterioration of cement mortar lining in reclaimed water pipelines

Failure analysis of leaking firefighting pipeline used in nuclear power plant: Corrosion development process and key influence factors

Analysis and investigation of the leakage failure on the shale gas gathering and transmission pipeline

Experimental Investigation on Corrosion Behavior of Slag-Cement-mortar-lined Ductile Iron Pipe in Flowing Solutions

Detection and analysis of corrosion and failure of urban buried steel-made gas pipeline

Characteristics of Iron Corrosion Scales and Water Quality Variations in Drinking Water Distribution Systems of Different Pipe Materials.

Failure Analysis of Leakage of X42 Line Pipe

Safety and reliability assessment of external corrosion defects assessment of buried pipelines—soil interface: A mechanisms and FE study

Failure Analysis on Abnormal Perforation of Super Large Diameter Buried Gas Pipeline Nearby Metro

Electrochemical and Microscopic Study on Corrosion Characteristics of Cement-Mortar-Lined Ductile Iron Pipe in Flowing Solutions

Failure Analysis of Erosion-Corrosion of the Bend Pipe at Sewage Stripping Units

Electrochemical study on corrosion process of cement-mortar-linedductile cast iron pipe under water supply

Review on corrosion and corrosion scale formation upon unlined cast iron pipes in drinking water distribution systems