Abstract:Corrosion defects in steel pipes can lead to pipeline failure, and such failures can have severe impacts; thus, developing appropriate corrosion mitigation schemes to prevent them can be beneficial. To this end, the influences of variables such as the depth, length, and group spacing of corrosion defects on the failure of X80 steel pipes containing group corrosion defects were analysed in this study. Abaqus, a simulation software, was used for non-linear finite element analyses, and 52 groups corresponding to corrosions under different geometric factors were prepared. Furthermore, a pipeline failure pressure prediction model was established using 138 sets of simulations to determine the maximum von Mises stresses of pipelines subjected to internal pressures under different working conditions. Actual blast test data and error comparisons with various existing evaluation standards were conducted to verify the accuracy of the proposed model. The results revealed that an increase in the internal pressure and the changes in the depth, length, and group spacing of group corrosion defects impact the maximum von Mises stress in the pipe. Among the group corrosion defects considered, the depth of the deepest defect was found to be the most critical factor in determining the form of damage and the failure pressure of pipes containing corrosion defects. The length of corrosion defects and the axial spacing between groups of defects were found to be the secondary factors that affect the failure pressure. In an actual pipeline, group corrosion defects are expected to cause a reduction in the wall thickness and, thus, pose a threat to safety, an issue that warrants substantial attention. The results of this work can serve as a reference for assessing the failure of X80 steel pipelines containing group corrosion defects.

Comprehensive analysis of corrosion failure of blast furnace gas pipeline in a steel plant

Corrosion Behaviors and Mechanical Properties of Q235 Steel Pipes Collapsing Due to Corrosion after 25-Year Service in Urban Industrial Atmospheric Environment

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Corrosion Failure Analyses of 20 Steel Pipeline for Hydrogen Transportation in Swampland

Failure Causes Analysis of Circumferential Cracking on Gathering Pipeline in M Oil and Gas Field

Finite element analysis of the failure of high-strength steel pipelines containing group corrosion defects

Research on the Corrosion Behavior of Q235 Pipeline Steel in an Atmospheric Environment through Experiment

Analysis and investigation of the leakage failure on the shale gas gathering and transmission pipeline

Failure Analysis on Water Wall Tube Burst of Heating Furnace

Failure Analysis of A Pipeline in Sour Gas Field

Analysis of Corrosion Failure of 20# Steel Tubular Induction Probe in Simulated Environment of a Gas Field

Failure analysis of local effusion corrosion in small diameter gas pipeline: Experiment and numerical

Failure analysis of leaking firefighting pipeline used in nuclear power plant: Corrosion development process and key influence factors

Failure analysis of CO2 corrosion of natural gas pipeline under flowing conditions

Safety and reliability assessment of external corrosion defects assessment of buried pipelines—soil interface: A mechanisms and FE study

Electrochemical Investigation of the Corrosion of Different Microstructural Phases of X65 Pipeline Steel under Saturated Carbon Dioxide Conditions

Corrosion Failure Analysis for Heat Transfer Tube in Quick Cooled Oil-Dilute Steam Heat Exchanger

Failure analysis in buried ductile iron pipelines: A study of leakage in drinking water distribution systems

Flow enhanced corrosion of tee in gas transmission pipeline

Analysis of crack causes and effects of the A333 low carbon pipeline steel after thermite welding

Corrosion behaviour of 316L stainless steel and anti-corrosion materials in a high acidified chloride solution