Abstract:Suspension effect poses a big threat to the integrity and safety of corroded pipelines. In this work, a finite element (FE) based multi-physics field coupling model was developed to determine the mechano-electrochemical (M-E) interaction at an external corrosion defect on a suspended X100 steel pipe and predict its failure pressure. Theoretical calculations were used for model validation. Parameter effects including the defect location on the pipe, geometry of the defect, suspension length and pipe burial depth were determined. Results demonstared that, generally, the M-E effect at corrosion defect caused an increased stress concentration and anodic current density (i.e., corrosion rate), decreasing the failure pressure of the pipeline. The effect became more apparent when the pipe was in suspension. Both the stress and the anodic current density at the corrosion defect were dependent on the defect geometry, especially the defect depth. When the depth was up to 40% of pipe wall thickness, the von Mises stress exceeded the yield stress of the steel, causing local plastic deformation. A critical defect length of <math>20Dt</math> (D is the outer diameter of the pipe and t is pipe wall thickness) existed, below which the von Mises stress and the anodic current density at the corrosion defect increased with increased defect length. When the defect length exceeded the critical value, the effect was not obvious. An increased suspension length of the pipe would elevate the local stress and anodic current density at the corrosion defect, reducing the failure pressure of the pipe. A critical pipe burial depth of 2.5 m was identified, exceeding which the failure pressure of the pipe decreased rapidly with the increased burial depth. When the burial depth was smaller than 2.5 m, the effect was marginal. The location of the corrosion defect on the pipe did not affect the local stress, anodic current density and failure pressure at an appreciable level, and could be ignored in defect assessment on suspended pipelines.

Mechanical model and probability analysis of buried pipelines failure under uniform corrosion

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Failure Prediction and Reliability Analysis of Buried Grey Cast Iron Water Mains Considering Corrosion

Failure Prediction Model and Influence Parameter Analysis of Buried Cast Iron Water Mains

Probabilistic model to predict longitudinal fracture failure of buried pvc pipes

Evaluating Fitness-for-Service of Corroded Metal Pipelines: Structural Reliability Bases

Double Circular Arc Model Based on Average Shear Stress Yield Criterion and Its Application in the Corroded Pipe Burst

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

Integrity Assessment of the Pipelines Containing an Isolated Corrosion Pit

Computation Model of the Failure Probability and Reliability for the Submarine Oil and Gas Pipeline with Corrosion Defects

Effect of the Y/T on the Burst Pressure for Corroded Pipelines with High Strength

Finite element modeling of corrosion defect growth and failure pressure prediction of pipelines

Prediction Model for Failure Pressure of Large-Diameter Gas Pipelines at Different Temperatures

Modeling of mechano-electrochemical interaction at a corrosion defect on a suspended gas pipeline and the failure pressure prediction

Analytical prediction of failure pressure for pipeline with long corrosion defect

An integrated risk analysis model for corroded pipelines subjected to internal pressures: Considering the interacting effects

Non-probabilistic time-dependent reliability analysis for suspended pipeline with corrosion defects based on interval model

Theoretical analysis of the collapse behaviour of subsea pipelines with corrosion defects under external pressure

Subset simulation based simplified approach for pipeline with multiple irregular corrosion defects in time-dependent reliability analysis

Probabilistic-Based Assessment of Corroded Pipelines: A Comparison Between Closed Form and Surrogate Limit States

Analysis and Evaluation on Residual Strength of Pipelines with Internal Corrosion Defects in Seasonal Frozen Soil Region