Abstract:Corrosion defects in steel pipes can lead to pipeline failure, and such failures can have severe impacts; thus, developing appropriate corrosion mitigation schemes to prevent them can be beneficial. To this end, the influences of variables such as the depth, length, and group spacing of corrosion defects on the failure of X80 steel pipes containing group corrosion defects were analysed in this study. Abaqus, a simulation software, was used for non-linear finite element analyses, and 52 groups corresponding to corrosions under different geometric factors were prepared. Furthermore, a pipeline failure pressure prediction model was established using 138 sets of simulations to determine the maximum von Mises stresses of pipelines subjected to internal pressures under different working conditions. Actual blast test data and error comparisons with various existing evaluation standards were conducted to verify the accuracy of the proposed model. The results revealed that an increase in the internal pressure and the changes in the depth, length, and group spacing of group corrosion defects impact the maximum von Mises stress in the pipe. Among the group corrosion defects considered, the depth of the deepest defect was found to be the most critical factor in determining the form of damage and the failure pressure of pipes containing corrosion defects. The length of corrosion defects and the axial spacing between groups of defects were found to be the secondary factors that affect the failure pressure. In an actual pipeline, group corrosion defects are expected to cause a reduction in the wall thickness and, thus, pose a threat to safety, an issue that warrants substantial attention. The results of this work can serve as a reference for assessing the failure of X80 steel pipelines containing group corrosion defects.

An integrated risk analysis model for corroded pipelines subjected to internal pressures: Considering the interacting effects

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Mechanical model and probability analysis of buried pipelines failure under uniform corrosion

Integrity Assessment of the Pipelines Containing an Isolated Corrosion Pit

Effect of the Y/T on the Burst Pressure for Corroded Pipelines with High Strength

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

Evaluating Fitness-for-Service of Corroded Metal Pipelines: Structural Reliability Bases

Assessment by finite element modeling of the interaction of multiple corrosion defects and the effect on failure pressure of corroded pipelines

Probabilistic finite element-based reliability of corroded pipelines with interacting corrosion cluster defects

Double Circular Arc Model Based on Average Shear Stress Yield Criterion and Its Application in the Corroded Pipe Burst

Assessment of the interaction of corrosion defects on steel pipelines under combined internal pressure and longitudinal compression using finite element analysis

Effect of interaction between corrosion defects on failure pressure of thin wall steel pipeline

Failure pressure analysis of corroded moderate-to-high strength pipelines

Finite element modeling of corrosion defect growth and failure pressure prediction of pipelines

Probabilistic-Based Assessment of Corroded Pipelines: A Comparison Between Closed Form and Surrogate Limit States

Failure Pressure Analysis of the Pipe with Inner Corrosion Defects by FEM

Failure Pressure Estimation of Corroded Pipeline with Different Depths of Interacting Defects Subjected to Internal Pressure

Analytical prediction of failure pressure for pipeline with long corrosion defect

Buckling Strength of Corroded Pipelines with Interacting Corrosion Defects: Numerical Analysis

Development of an empirical model to predict the burst pressure of corroded elbows of pipelines by finite element modelling

Finite element analysis of the failure of high-strength steel pipelines containing group corrosion defects