Abstract:The shell and tube heat exchanger has been widely used in the chemical industry. However, because of complex operating conditions, the heat exchanger tubes sometimes are leaked. This paper conducted in-depth failure analysis on abnormal leakage of several tubes of a shell and tube heat exchanger, which had been used for nine years in a methyl methacrylate production facility. In order to find out the root cause of the failure, chemical analysis, metallographic structure inspection and morphology observation of the leakage tubes were carried out. The composition and properties of the tube scales were analyzed by X-ray fluorescence spectroscopic analysis (XRF), X-ray diffraction analysis (XRD), thermogravimetric analysis (TGA), and energy spectrum analysis (EDS). The micro-zone features of the leaked tubes were observed with three-dimensional stereo microscope (3D-SM) and scanning electron microscope (SEM). According to the testing results and the actual operating conditions of the heat exchanger, the root cause of abnormal leakage of the tubes was finally determined. The key finding was that the terephthalic acid gas was suddenly desublimated into solid particles while its temperature was about 300 degrees C. Thus, the gas containing terephthalic acid particles caused erosion wear, abrasive wear and local corrosion onto the inlet side of the heat exchanger, leading to abnormal leakage of the tubes. Finally, some suggestions were put forward for the heat exchanger, which were also conducive to the safe operation and failure prevention of similar equipment.

Failure Analysis on Abnormal Leakage of TP321 Stainless Steel Pipe in Hydrogen-Eliminated System of Nuclear Power Plant

Failure Analysis on Abnormal Leakage of TP321 Stainless Steel Pipe of Medium Temperature Shifting Gas in Hydrogen Production System

Cause Analyses of the Weld Seam Cracks of a Prehydrogenating Reactor

Failure analysis of 316L stainless steel corrugated pipe

Failure Analysis on Premature Fracture of Anchor Bolts in Seawater Booster Pump of Nuclear Power Plant

Failure Analysis of Leakage on Titanium Tubes Within Heat Exchangers in a Nuclear Power Plant. Part II: Mechanical Degradation

Failure analysis of leaking firefighting pipeline used in nuclear power plant: Corrosion development process and key influence factors

Failure analysis on leaked titanium tubes of seawater heat exchangers in recirculating cooling water system of coastal nuclear power plant

Failure analysis on fracture causes of stainless-steel studs in seawater system of nuclear power plants

Failure Analysis and Countermeasure of Heat Exchangers in Nuclear Power Facility

Failure Analysis on Abnormal Leakage Between Tubes and Tubesheet of Spiral-Wound Heat Exchanger for Nuclear Power Plant

Failure analysis of 2205 duplex stainless steel connecting pipe for composite plate pressure vessel in a high pressure gas field

Failure analysis of heat exchange tubes in hydrogenation unit

Failure Analysis on Abnormal Bursting of Heat Transfer Tubes in Spiral-Wound Heat Exchanger for Nuclear Power Plant

Failure analysis of abnormal leakage in hydrogen cyanide reactor

Failure Analysis on Unexpected Fracture of the Hydraulic Expansion Mandrel for Tube to Tubesheet Expanding in the Steam Generator of Nuclear Power Plant

Failure Analysis of Stainless Steel Gate Valve in Ammonium Phosphate Solution

Failure analysis of crevice corrosion on 304 stainless steel tube heat exchanger

Failure Analysis on Abnormal Leakage of Shell and Tube Heat Exchanger in Specialty Chemical Plant

Failure Analysis on Abnormal Wall Thinning of Heat-Transfer Titanium Tubes of Condensers in Nuclear Power Plant Part II: Erosion and Cavitation Corrosion

Failure Analysis of O-ring Gaskets of the Electric Hydraulic System in the Nuclear Power Plant