Abstract:The shell and tube heat exchanger has been widely used in the chemical industry. However, because of complex operating conditions, the heat exchanger tubes sometimes are leaked. This paper conducted in-depth failure analysis on abnormal leakage of several tubes of a shell and tube heat exchanger, which had been used for nine years in a methyl methacrylate production facility. In order to find out the root cause of the failure, chemical analysis, metallographic structure inspection and morphology observation of the leakage tubes were carried out. The composition and properties of the tube scales were analyzed by X-ray fluorescence spectroscopic analysis (XRF), X-ray diffraction analysis (XRD), thermogravimetric analysis (TGA), and energy spectrum analysis (EDS). The micro-zone features of the leaked tubes were observed with three-dimensional stereo microscope (3D-SM) and scanning electron microscope (SEM). According to the testing results and the actual operating conditions of the heat exchanger, the root cause of abnormal leakage of the tubes was finally determined. The key finding was that the terephthalic acid gas was suddenly desublimated into solid particles while its temperature was about 300 degrees C. Thus, the gas containing terephthalic acid particles caused erosion wear, abrasive wear and local corrosion onto the inlet side of the heat exchanger, leading to abnormal leakage of the tubes. Finally, some suggestions were put forward for the heat exchanger, which were also conducive to the safe operation and failure prevention of similar equipment.

Failure Analysis of Ball Valve Made of Stainless Steel in Ammonium Phosphate Solution

Failure Analysis of Stainless Steel Gate Valve in Ammonium Phosphate Solution

Study on Leakage Reasons of Gate Valve in Ammonium Phosphate Solution

Failure Analysis on Wear of Stopcock in Alkali Solution

Fracture failure analysis on Alloy783 bolts in medium-pressure valve bonnets of USC units

Failure analysis on synergistic effect of erosion and corrosion on failed fittings in specialty chemical plant. Part II: Control valve

Corrosion Failure Analysis of Stainless Steel Components for Maleic Anhydride Plant

Failure analysis on fracture causes of stainless-steel studs in seawater system of nuclear power plants

Corrosion Failure of Stainless Steel Tube During Storage

Failure Analysis of the High Nitrogen Austenitic Stainless-Steel Boiler Tank Weldments

Failure Analysis on Water Wall Tube Burst of Heating Furnace

Failure analysis of heat exchange tubes in hydrogenation unit

Failure Analysis of Brass Tube on Condenser

FAILURE ANALYSIS OF A STAINLESS STEEL DIVERSION TUBE INSIDE A BELLOWS

Failure Analysis on Abnormal Leakage of Shell and Tube Heat Exchanger in Specialty Chemical Plant

Failure Analysis of Collecting Pipe Head Used in Ammonia Refrigerating System

Failure Analysis on Corrosion of Refeed Valve Manhole Door in Circulating Fluidized Bed Boiler

Corrosion failure analysis of the heat exchanger in a hot water heating boiler

Failure analysis of stainless steel metal hose in welding

Remanufacturing of High Temperature Ball Valve by Surface Engineering Technology

Corrosion of Stainless Steel Valves in a Reverse Osmosis System: Analysis of Corrosion Products and Metal Loss