Abstract:Abstract The design and implementation of planar multi-way differential power dividers remain a challenge in terms of the compactness and especially, for the achievable characteristic impedance of the quarter-wavelength transformer when considering large number of outputs. In this work, the double-sided parallel stripline is recommended to realize such a power divider with out-of-phase outputs, and explicit design methods are provided. The proposed multi-way power divider was developed without the use of lump elements on a single substrate. For system applications, a prototype operating at 41.6 MHz with 12 pairs of out-of-phase outputs that utilize the microstrip line as the output interfaces was fabricated and examined. At the center frequency of 41.6MHz, the developed prototype measured insertion losses akin to 14.3 dB as compared with the theoretical data of 13.8 dB. The attainable impedance bandwidth ranges from 10 MHz to 80 MHz under a magnitude imbalance of ±0.3 dB. The isolations of the adjacent outputs are about 13.1 dB as compared with the theoretical values of 14.428 dB, and are better than 34 dB for more distant ones. Parameter measurements are in good agreement with the numerical predications, thus demonstrating the realization of the proposed multi-way power divider.

A Novel Compact Planar Six-Way Power Divider Using Folded and Hybrid-Expanded Coupled Lines

Compact Rat-Race Coupler with Double-Sided Parallel-Strip Line (DSPSL) for Dual-Band Arbitrary Power Divisions

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

A Novel Reconfigurable Three-Way Power Divider Constructed on Unitary Plane

Novel Planar Compact Coupled-Line Singleended-To-Balanced Power Divider

Novel design of compact quad‐band divider using stepped impedance coupled lines

Compact Design of Dual-Band Power Divider with Coupled-Line Shunt Elements

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

Compact High-Isolation Planar Eight-Way Power Divider Using Zero-Phase Isolation Circuit

Planar Four-Way Power Divider with Stopband Rejection and Good Output Isolation

Flexible Design of a Compact Coupled-Line Power Divider

Multilayer Four-Way Power Divider with Improved Isolation Performance

A Novel Design of Compact Out-of-Phase Power Divider with Arbitrary Ratio

Design of Reduced-Size Unequal Power Divider for Dual-Band Operation with Coupled Lines

A Novel Harmonics-Suppression Coupled-Line Gysel Power Divider for Complex Terminated Impedances

Multi-way Differential Power Divider with Microstrip Output Interfaces

A New Compact Power Divider Based on Capacitor Central Loaded Coupled Microstrip Line

Millimeter Wave Compact Power Divider Based on Micro-coaxial Lines

Compact Four-Way Suspended-Stripline Power Divider With Low Loss And High Isolation

Design and Measurement of a Six-Way Microwave Power Splitter with Good Phase Consistency

Compact Four-Way Radial-Cavity-Based Power Divider/Combiner with High Power and High Isolation