Abstract:Due to the fluctuation and non-uniform distribution of temperature within the core structure of high-temperature gas-cooled reactors (HTGRs), the thermal expansion behavior of graphite materials plays an important role in the design of graphite components, especially of large-scale components. In the present paper, in order to investigate the influence of stress levels on the coefficient of thermal expansion (CTE) of IG-110 graphite, the strain gauge method was used to measure the CTE on the cylindrical specimens under a series of loads applied using a universal tensile testing machine. In addition, a more precise measurement using a thermal dilatometer was employed to validate the tests using the strain gauge method. A good agreement has been obtained between the experimental results using these two methods. The results show that when the specimens were under compressive loads, the CTE along the loading direction of the specimens increased and that along the perpendicular direction decreased, with more changes in the former. The absolute changes of the CTE in the two directions increased with increasing applied load. When graphite specimens were subjected to a compressive load of 40MPa, the axial CTE of specimens sectioned along the radial direction of the graphite brick as it is installed in the core structure increased from 4.13×10−6 to 5.35×10−6K−1, while the axial CTE of specimens sectioned along the vertical direction increased from 3.97×10−6 to 5.58×10−6K−1. Moreover, the residual change of the CTE, which was caused by the permanent residual strain after unloading, was observed. The change of the CTE with stress levels should be considered in the stress analysis and life prediction of the nuclear graphite components.

Determining Thermal Expansion Coefficient of Stressed Thin Films at Low Temperature

Measurement of Thermal Expansion at Low Temperatures Using the Strain Gage Method

Measurement of linear thermal expansion coefficient for cryogenic electric connector material

On the thermal expansion coefficients of thin films

Micron-Scale Measurements of the Coefficient of Thermal Expansion by Time-Domain Probe Beam Deflection

Determining thermal expansion coefficients of thin films using micromachined cantilevers

Simple Nanoindentation-Based Method for Determining Linear Thermal Expansion Coefficients of Micro-Scale Materials

Design and Implementation of a Thin Film Tensile Testing Apparatus for Cryogenic Applications

On the Study of Stress-Strain of Thin-Walled Cylinder Tensile Specimens at High Temperature

Temperature-Dependent Coefficient of Thermal Expansion of Concrete in Freezing Process

Determination of the Coefficient of Thermal Expansion with Embedded Long-Gauge Fiber Optic Sensors

The Effect of Stress Levels on the Coefficient of Thermal Expansion of a Fine-Grained Isotropic Nuclear Graphite

Coefficient of thermal expansion of nanostructured tungsten based coatings assessed by thermally induced substrate curvature method

A Method of Studying the Effect of Stress and Thermal-stress Coupling on the Thermal Conductivity of the Film

Evaluation of thermal expansion coefficient of carbon fiber reinforced composites using electronic speckle interferometry

Measurement of Thermal Expansion of Superconducting Wires at Cryogenic Temperature Based on Tensile Method

Thermal Expansion and Magnetostriction Measurements at Cryogenic Temperature Using the Strain Gauge Method

Effect of Geometric Parameter on Thermal Stress Generation in Fabrication Process of Double-Ceramic-layers Thermal Barrier Coating System

Coefficient of thermal expansion of nanostructured tungsten based coatings assessed by substrate curvature method

In-Situ Determination Of The Coefficient Of Thermal Expansion Of Polysilicon Thin Films Using Micro-Rotating Structures

Measurement of Coefficient of Thermal Expansion of Films Using Digital Image Correlation Method