Coefficient of thermal expansion of nanostructured tungsten based coatings assessed by substrate curvature method

E. Besozzi,D. Dellasega,A. Pezzoli,A. Mantegazza,M. Passoni,M.G. Beghi

DOI: https://doi.org/10.1016/j.matdes.2017.10.001

2018-01-01

Abstract:The in plane coefficient of thermal expansion (CTE) and the residual stress of nanostructured W based coatings are extensively investigated. The CTE and the residual stresses are derived by means of an optimized ad-hoc developed experimental setup based on the detection of the substrate curvature by a laser system. The nanostructured coatings are deposited by Pulsed Laser Deposition. Thanks to its versatility, nanocrystalline W metallic coatings, ultra-nano-crystalline pure W and W-Tantalum coatings and amorphous-like W coatings are obtained. The correlation between the nanostructure, the residual stress and the CTE of the coatings are thus elucidated. We find that all the samples show a compressive residual state of stress that decreases as the structure goes from columnar nanocrystalline to amorphous-like. The CTE of all the coatings is higher than the one of the corresponding bulk W form. In particular, as the grain size shrinks, the CTE increases from 5.1 10−6 K−1 for nanocrystalline W to 6.6 10−6 K−1 in the ultra-nano-crystalline region. When dealing with amorphous W, the further increase of the CTE is attributed to a higher porosity degree of the samples. The CTE of the coatings is also investigated as function of materials stiffness: when stiffness decreases, the CTE increases.

materials science, multidisciplinary