Abstract:Introduction. Thermal expansion is an important thermal and physical characteristic of materials, showing its expansion when heated. Knowing this property is important both from a scientific point of view and for practical applications. Materials with low thermal expansion are widely used in electronics, thermal barrier coatings and other applications. Mismatch in thermal expansion between different materials can lead to thermal stress on contact surfaces. The in-situ synchrotron X-ray diffraction method can detect this mismatch. Thermal stress requires an analysis of the coefficient of thermal expansion. Bulk expansion behavior is observed in thermally sprayed coatings. The CTE is important for designing and predicting coating performance under thermal stresses. Changes in the KTE can cause cracking and degradation of the coating. In-situ X-ray diffraction analysis helps to understand thermal expansion, crystallite size and stress and strain variation with temperature change. The aim of this work is to interpret and use in-situ high temperature X-ray diffraction as an effective tool to study the thermal mismatch behavior of a W-Co alloy substrate (8 % w/w Co, WC — matrix) with CrN, ZrN and CrZrN multilayer coatings and the characteristic differences between single component coatings and its combination in a multilayer coating. Research Methodology. In this work, specimens of chromium and zirconium nitride coatings deposited on W-Co hard alloy substrates were investigated. The fundamental method in this work is in-situ analysis using synchrotron radiation. The lattice parameter as a function of cycling temperature, the coefficient of thermal expansion during heating and cooling, and the thermal expansion mismatch between the substrate-coating pair and the coating layers in the multilayer coating were evaluated. Results and discussion. The lattice parameters and thermal expansion of the coatings are investigated. The lattice parameter of all coatings decreased during thermal cycling, indicating nitrogen evaporation. The multilayer coating has the least change in the parameter, possibly due to diffusion barriers. Lattice distortions do not differ between single and multilayer coatings. All coatings exhibit thermal expansion similar to the substrate. The multilayer coating creates conditions for compressive stresses in one phase and tensile stresses in the other phase, so the lifetime of multilayer coatings is expected to be high.

Coefficient of thermal expansion of nanostructured tungsten based coatings assessed by thermally induced substrate curvature method

Coefficient of thermal expansion of nanostructured tungsten based coatings assessed by substrate curvature method

Influence of Surface Morphology and Microstructure on Performance of CVD Tungsten Coating under Fusion Transient Thermal Loads

Effect of High Temperature Annealing on the Microstructure and Thermal Shock Resistance of Tungsten Coatings Grown by Chemical Vapor Deposition

Thermal Shock Performance of CVD Tungsten Coating at Elevated Temperatures

Amorphous, ultra-nano- and nano-crystalline tungsten-based coatings grown by Pulsed Laser Deposition: mechanical characterization by Surface Brillouin Spectroscopy

Thermomechanical properties of amorphous metallic tungsten-oxygen and tungsten-oxide coatings

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

The Elastic and Frictional Properties of Nanoscale Coatings Based on Molybdenum Disulfide at Micro and Nano Levels

Growth selection induced residual stresses and fracture behavior of as‐deposited thermal barrier coatings

Precise Strain Profile Measurement As a Function of Depth in Thermal Barrier Coatings Using High Energy Synchrotron X-rays

Mechanical performance and nanoindenting deformation of (AlCrTaTiZr)NCy multi-component coatings co-sputtered with bias

In situ crystal lattice analysis of nitride single-component and multilayer ZrN/CrN coatings in the process of thermal cycling

An Experimental Study of Chemical Vapour Deposition of Tungsten on Ti/TiN Adhesion Bilayers: Mechanical Properties

In-situ real-time evolution of intrinsic stresses and microstructure during growth of cathodic arc deposited (Al,Ti)N coatings

Evaluation of thermal expansion coefficient of carbon fiber reinforced composites using electronic speckle interferometry

Cross-Sectional Residual Stresses in Thermal Spray Coatings Measured by Moiré Interferometry and Nanoindentation Technique

The Effect of Stress Levels on the Coefficient of Thermal Expansion of a Fine-Grained Isotropic Nuclear Graphite

In Situ X-ray Diffraction Study on the Orientation-Dependent Thermal Expansion of Cu Nanowires

Study Of Non-Contact Measurement Of The Thermal Expansion Coefficients Of Materials Based On Laser Feedback Interferometry

Explaining the effect of in-plane strain on thermal degradation kinetics of Cu/W nano-multilayers