Abstract:This paper presents a setup for measuring the Seebeck coefficient and the electrical resistivity of bulk thermoelectric materials. The sample holder was designed to have a compact structure and can be directly mounted in a standard cryostat system for temperature-dependent measurements. For the Seebeck coefficient measurement, a thin bar-shaped sample is mounted bridging two copper bases; and two ceramic heaters are used to generate a temperature gradient along the sample. Two type T thermocouples are used to determine both temperature and voltage differences between two widely separated points on the sample. The thermocouple junction is flattened into a disk and pressed onto the sample surface by using a spring load. The flexible fixation method we adopted not only simplifies the sample mounting process but also prevents thermal contact deterioration due to the mismatch of thermal expansion coefficients between the sample and other parts. With certain modifications, the sample holder can also be used for four-probe electrical resistivity measurements. High temperature measurements are essential for thermoelectric power generation. The experimental system we developed is capable of measuring the Seebeck coefficient and the electrical resistivity of bulk thermoelectric materials in a wide temperature range from 80 to 500 K, which can be further extended to even higher temperatures. Measurements on two standard materials, constantan and nickel, confirmed the accuracy and the reliability of the system.

Measurement of linear thermal expansion coefficient for cryogenic electric connector material

Measurement of Thermal Expansion at Low Temperatures Using the Strain Gage Method

Measure Metallic Linear Expansion Coefficient by Optical Lever Method

Experimental study on the performance of cryogenic seal structure with indium

Thermal Expansion and Magnetostriction Measurements at Cryogenic Temperature Using the Strain Gauge Method

Push-rod dilatometer calibration and thermal expansion coefficient measurement of standard material

Measurement of the thermal expansion of metal and FRPs

The Development of Experimental Sets for Measuring Linear Thermal Expansion Coefficient of Metal Using Digital Video-Based Single Slit Diffraction Method

A systematic study on linear thermal expansion coefficient of metals based on interferometric measurement with Fresnel bimirror

Study Of Non-Contact Measurement Of The Thermal Expansion Coefficients Of Materials Based On Laser Feedback Interferometry

Properties of selected structural and flat flexible cabling materials for low temperature applications

Evaluation of thermal expansion coefficient of carbon fiber reinforced composites using electronic speckle interferometry

A Method for Designing Linear Thermal Expansion Coefficient of Components

Measurement of the thermal expansion coefficient of an Al-Mg alloy at ultra-low temperatures

Measurement Of Thermal Expansion Coefficients Of Materials Based On Nd:Yvo4 Laser Feedback Systems

The measuring approach of the nonlinear high-temperature coefficient of thermal expansion during isothermal cooling

Temperature-Dependent Coefficient of Thermal Expansion of Concrete in Freezing Process

Silicon cell for the precise measurement of thermal expansion at low temperatures: Results for Cu and NaF

A Setup for Measuring the Seebeck Coefficient and the Electrical Resistivity of Bulk Thermoelectric Materials

Development of Strain Measurement in Superconducting Magnet Through Fiber Bragg Grating

Measuring coefficient of thermal expansion of materials of micrometre size using SEM/FIB microscope with in situ MEMS heating stage