Abstract:The internal pore structural characteristics and microbubble distribution features of concrete have a significant impact on its frost resistance, but their size is relatively small compared to aggregates, making them difficult to visually represent in the mesoscopic numerical model of concrete. Therefore, based on the ice-crystal phase transition mechanism of pore water and the theory of fine-scale inclusions, this paper establishes an estimation model for effective thermal conductivity and permeability coefficients that can reflect the distribution characteristics of the internal pore size and the content of microbubbles in porous media and explores the evolution mechanism of effective thermal conductivity and permeability coefficients during the freezing process. The segmented Gaussian integration method is adopted for the calculation of integrals involving pore size distribution curves. In addition, based on the concept that the fracture phase represents continuous damage, a switching model for the permeability coefficient is proposed to address the fundamental impact of frost cracking on permeability. Finally, the proposed estimation models for thermal conductivity and permeability are applied to the cement mortar and the interface transition zone (ITZ), and a thermal-hydraulic-mechanical coupling finite element model of concrete specimens at the mesoscale based on the fracture phase-field method is established. After that, the frost-cracking mechanism in ordinary concrete samples during the freezing process is explored, as well as the mechanism of microbubbles in relieving pore pressure and the adverse effect of accelerated cooling on frost cracking. The results show that the cracks first occurred near the aggregate on the concrete sample surface and then extended inward along the interface transition zone, which is consistent with the frost-cracking scenario of concrete structures in cold regions.

Temperature-Dependent Coefficient of Thermal Expansion of Concrete in Freezing Process

Numerical simulation of the freezing process of concrete

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Change of the Coefficient of Thermal Expansion of Mortar Due to Damage by Freeze Thaw Cycles

Concrete Thermal Cracking Analysis with Cement Hydration Model and Equivalent Age Method

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

Experimental investigation on electrical response and mechanical performance of cementitious materials at low temperatures

Mathematical Modeling and Analysis of Concrete Subjected to Freeze-Thaw Cycles

A Numerical Study on Chloride Diffusion in Freeze-Thaw Affected Concrete

A Study of the Behaviors of Cement-Based Materials Subject to Freezing

Experimental studies and numerical analysis of the dynamic mechanical properties of concrete at low temperatures

Multiscale Thermoelastic Analysis of the Thermal Expansion Coefficient and of Microscopic Thermal Stresses of Mature Concrete

Model for Hydration Heat of Cement in Concrete and Its Application

FREE THERMAL EXPANSION STRAIN OF CONCRETE WITH DIFFERENT STRENGTH GRADES EXPOSED TO DIFFERENT RAISING TEMPERATURE RATES

Experimental Investigation of the Deformational Behavior of the Interfacial Transition Zone (itz) in Concrete During Freezing and Thawing Cycles

Theoretical Model for Estimation of Ice Content of Concrete by Using Electrical Measurements

TEMPERATURE FIELD ANALYSIS IN MASSIVE CONCRETE CONSTRUCTED LAYER BY LAYER

Experimental study on the thermal expansion coefficient of high-strength/performance concrete at early ages

Experimental Investigation of the Static Expansion Tensile Behavior of Concrete after Exposure to Elevated Temperatures

Simulation of Frost-Heave Failure of Air-Entrained Concrete Based on Thermal-Hydraulic-Mechanical Coupling Model