Abstract:An adiabatic temperature rise (ATR) test was used to determine the degree of cement hydration in concrete. In the experiments, emphasis was placed on the influences of water to cementitious material ratio (w/b) and aggregate content on the ATR and the development of degree of cement hydration. A total of nine concrete mixtures with three w/b ratios (0·30, 0·43, 0·62) and three aggregate contents (50%, 60%, 70% by volume) were used in the tests. The experimental results show that, for a given aggregate content, the lower the w/b ratio, the higher the temperature rise. For a given w/b ratio, the higher the aggregate content, the lower the temperature rise. The effects of temperature and age on the hydration process of cement may be taken into consideration by the equivalent age concept. For the same equivalent age, the degree of cement hydration is a function of w/b ratio only, regardless of the aggregate content. The advance of degree of cement hydration with equivalent age can be described as an initially slow developing stage, followed by a fast increasing stage and then a nearly steady-state stage. With an increase in w/b ratio, both the length of the initial stage and the ultimate degree of cement hydration at steady state increase. The higher the w/b, the longer the equivalent age needed to achieve the steady state. In addition, a model for predicting concrete elastic modulus and compressive strength, based on the degree of cement hydration in which the effect of environmental drying can be taken into account, was developed; good agreement was found between the test and model results. The model may be used for the prediction of mechanical properties of precast concrete under different curing conditions.

Model for Hydration Heat of Cement in Concrete and Its Application

TEMPERATURE FIELD ANALYSIS IN MASSIVE CONCRETE CONSTRUCTED LAYER BY LAYER

Concrete Thermal Cracking Analysis with Cement Hydration Model and Equivalent Age Method

FINITE ELEMENT ANALYSIS OF HYDRATION HEAT TEMPERATURE FIELD IN CONCRETE FOUNDATION OF TONGBAI POWER STATION

Coupling Effect of Temperature and Relative Humidity Diffusion in Concrete under Ambient Conditions

Dynamic Model of Temperature Rise Caused by Cementitious Materials Hydration

Research on the application of thermosyphon in temperature control of large concrete structures

Prediction of Temperature Development of Concrete with Set-Controlling Admixture Based on A New Hydration Kinetics Model

Simulation of the Effects of Cement Particle Size on Adiabatic Temperature Rise of Concrete

NUMERICAL CALCULATION OF THE HYDRATION TEMPERATURE FIELD IN A MASS CONCRETE

Mathematical modeling of cement hydration process and microstructure development

Modeling of temperature distribution in mass concrete structure and proposal of method for identification of thermodynamic parameters

Cement Hydration Based Model to Predict the Mechanical Properties of Precast Concrete

Dynamic models of hydration reaction of Portland cement and autogenous shrinkage of concrete

Numerical simulation of the freezing process of concrete

A Coupled Hygro-Thermal Model of Early-Age Concrete Based on Micro-Pore Structure Evolution

Micro Expressions of Cement Hydration Kinetics

CALCULATION OF TEMPERATURE FIELDS IN EARLY AGE CONCRETE BASED ON ADIABATIC TEST

KINETICS MODEL FOR THE HYDRATION MECHANISM OF CEMENTITIOUS MATERIALS

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State

Evaluate the effect of coarse aggregates on cement hydration heat and concrete temperature modelling using isothermal calorimetry