Abstract:Crucial mechanical-chemical (MC) interactions occur during the cement hydration process in cement marine clay; however, the role of such an important element of the resulting strength has been subject to less investigation, particularly from the theoretical perspective. To overcome this scientific gap, an efficient strength-based model accounting for the coupled MC processes is proposed here. Based on the analysis of the cement hydration mechanism, the porosity was chosen as the main factor to characterize the influence of the MC interactions on the overall response. To verify the accuracy of the MC model, the unconfined compressive strength (UCS) experiment was conducted for the cement marine clay samples, and the corresponding simulation model was constructed using COMSOL multiphysics®. In addition, a comparison between the predicted results by the existing three strength models and the proposed MC model was performed. Subsequently, the sensitivity analysis and identification of mechanical parameters were carefully carried out. The obtained results show that the UCS strength for Taizhou clay ranges from 10.21 kPa to 354.2 kPa as the cement content increases from 10% to 20%, and the curing time varies from 3 days to 28 days. The mechanical parameters in the MC model can be obtained according to the porosity level. A reasonably good agreement between the UCS strength results of simulations and the experimentally observed data is reported. Additionally, the predicted UCS strength results by the MC model demonstrate the best correspondence with the measured values, indicating the high efficacy of the established model.

Micro Expressions of Cement Hydration Kinetics

Mathematical modeling of cement hydration process and microstructure development

KINETICS MODEL FOR THE HYDRATION MECHANISM OF CEMENTITIOUS MATERIALS

Concrete Thermal Cracking Analysis with Cement Hydration Model and Equivalent Age Method

A Novel Strength Model for Cement Marine Clay Based on the Mechanical-Chemical Coupling Behavior

Model for Hydration Heat of Cement in Concrete and Its Application

Coupling Effect of Temperature and Relative Humidity Diffusion in Concrete under Ambient Conditions

Dynamic models of hydration reaction of Portland cement and autogenous shrinkage of concrete

Carbonation Process Simulation for Cement-Based Materials Based on Microstructure by a Cement Hydration Model

A new method for predicting compressive strength of cement-based materials

A Coupled Hygro-Thermal Model of Early-Age Concrete Based on Micro-Pore Structure Evolution

A New Hydration Kinetics Model of Composite Cementitious Materials, Part 1: Hydration Kinetic Model of Portland Cement

Kinetic study on the hydration of supersulfated cements

EXPERIMENTAL STUDY ON THE CHLORIDE DIFFUSION OF CONCRETE BASED ON ITS PORE STRUCTURE

A New Hydration Kinetics Model of Composite Cementitious Materials, Part 2: Physical Effect of SCMs

Recent Development on Understanding Cement Hydration Mechanism and Effects of Chemical Admixtures on Cement Hydration

Moisture Movement in Early-Age Concrete under Cement Hydration and Environmental Drying

Model for Simulating the Effects of Particle Size Distribution on the Hydration Process of Cement

Advances in understanding hydration of Portland cement

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Isothermal Calorimetry Tests and Modeling of Cement Hydration Parameters