Abstract:Crucial mechanical-chemical (MC) interactions occur during the cement hydration process in cement marine clay; however, the role of such an important element of the resulting strength has been subject to less investigation, particularly from the theoretical perspective. To overcome this scientific gap, an efficient strength-based model accounting for the coupled MC processes is proposed here. Based on the analysis of the cement hydration mechanism, the porosity was chosen as the main factor to characterize the influence of the MC interactions on the overall response. To verify the accuracy of the MC model, the unconfined compressive strength (UCS) experiment was conducted for the cement marine clay samples, and the corresponding simulation model was constructed using COMSOL multiphysics®. In addition, a comparison between the predicted results by the existing three strength models and the proposed MC model was performed. Subsequently, the sensitivity analysis and identification of mechanical parameters were carefully carried out. The obtained results show that the UCS strength for Taizhou clay ranges from 10.21 kPa to 354.2 kPa as the cement content increases from 10% to 20%, and the curing time varies from 3 days to 28 days. The mechanical parameters in the MC model can be obtained according to the porosity level. A reasonably good agreement between the UCS strength results of simulations and the experimentally observed data is reported. Additionally, the predicted UCS strength results by the MC model demonstrate the best correspondence with the measured values, indicating the high efficacy of the established model.

A New Hydration Kinetics Model of Composite Cementitious Materials, Part 1: Hydration Kinetic Model of Portland Cement

A New Hydration Kinetics Model of Composite Cementitious Materials, Part 2: Physical Effect of SCMs

KINETICS MODEL FOR THE HYDRATION MECHANISM OF CEMENTITIOUS MATERIALS

A Novel Strength Model for Cement Marine Clay Based on the Mechanical-Chemical Coupling Behavior

A New Hydration Kinetic Model Based on Boundary Nucleation and Growth Mechanism with Time-Dependent Growth Rate: Application to Quantitively Characterize the Influence of Alkali on the Early Hydration of Cement

Micro Expressions of Cement Hydration Kinetics

Mathematical modeling of cement hydration process and microstructure development

Modeling Anomalous Moisture Transport in Cement-Based Materials with Kinetic Permeability

A new method for predicting compressive strength of cement-based materials

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State

Model for Hydration Heat of Cement in Concrete and Its Application

Carbonation Process Simulation for Cement-Based Materials Based on Microstructure by a Cement Hydration Model

Model for Simulating the Effects of Particle Size Distribution on the Hydration Process of Cement

Morphological Effect of C–S–H Gel on the Elastic Behaviour of Early-Age Cement-Based Materials

Review on Hydration of Composite Cementitious Materials

Modeling the ionic diffusion coefficient of unsaturated hardened cement paste: A micromechanical approach

Dynamic models of hydration reaction of Portland cement and autogenous shrinkage of concrete

Moisture Movement in Early-Age Concrete under Cement Hydration and Environmental Drying

Kinetic study on the hydration of supersulfated cements

Hydration of Early‐Age Composite Cement Paste Using Low‐Field Nuclear Magnetic Resonance

Prediction of Effective Chloride Diffusivity of Cement Paste and Mortar from Microstructural Features