Abstract:Crucial mechanical-chemical (MC) interactions occur during the cement hydration process in cement marine clay; however, the role of such an important element of the resulting strength has been subject to less investigation, particularly from the theoretical perspective. To overcome this scientific gap, an efficient strength-based model accounting for the coupled MC processes is proposed here. Based on the analysis of the cement hydration mechanism, the porosity was chosen as the main factor to characterize the influence of the MC interactions on the overall response. To verify the accuracy of the MC model, the unconfined compressive strength (UCS) experiment was conducted for the cement marine clay samples, and the corresponding simulation model was constructed using COMSOL multiphysics®. In addition, a comparison between the predicted results by the existing three strength models and the proposed MC model was performed. Subsequently, the sensitivity analysis and identification of mechanical parameters were carefully carried out. The obtained results show that the UCS strength for Taizhou clay ranges from 10.21 kPa to 354.2 kPa as the cement content increases from 10% to 20%, and the curing time varies from 3 days to 28 days. The mechanical parameters in the MC model can be obtained according to the porosity level. A reasonably good agreement between the UCS strength results of simulations and the experimentally observed data is reported. Additionally, the predicted UCS strength results by the MC model demonstrate the best correspondence with the measured values, indicating the high efficacy of the established model.

A New Hydration Kinetics Model of Composite Cementitious Materials, Part 2: Physical Effect of SCMs

A New Hydration Kinetics Model of Composite Cementitious Materials, Part 1: Hydration Kinetic Model of Portland Cement

A Novel Strength Model for Cement Marine Clay Based on the Mechanical-Chemical Coupling Behavior

Unveil the Role of Nano-Caco3 in Early Shrinkage and Tensile Properties of Cement Paste: from Experimental Work to Modeling

KINETICS MODEL FOR THE HYDRATION MECHANISM OF CEMENTITIOUS MATERIALS

A New Hydration Kinetic Model Based on Boundary Nucleation and Growth Mechanism with Time-Dependent Growth Rate: Application to Quantitively Characterize the Influence of Alkali on the Early Hydration of Cement

Morphological Effect of C–S–H Gel on the Elastic Behaviour of Early-Age Cement-Based Materials

Micro Expressions of Cement Hydration Kinetics

Prediction of Chloride Binding Isotherms for Blended Cements

Advances in understanding hydration of Portland cement

Prediction of Effective Chloride Diffusivity of Cement Paste and Mortar from Microstructural Features

Kinetic study on the hydration of supersulfated cements

Modeling Anomalous Moisture Transport in Cement-Based Materials with Kinetic Permeability

Numerical study of the autogenous shrinkage of cement pastes with supplementary cementitious materials based on solidification theory

Improvement of the Hydration Kinetics of High Ferrite Cement: Synergic Effect of Gypsum and C 3 S–C 4 AF Systems

Model for Simulating the Effects of Particle Size Distribution on the Hydration Process of Cement

Review on Hydration of Composite Cementitious Materials

The Influence of Mayenite Employed as a Functional Component on Hydration Properties of Ordinary Portland Cement

Porewater compositions of Portland cement with and without silica fume calculated using the fine-tuned CASH+NK solid solution model

Time-dependent Retardation Effect of Epoxy Latexes on Cement Hydration: Experiments and Multi-Component Hydration Model

Influence of Submicron Fibrillated Cellulose Fibers from Cotton on Hydration and Microstructure of Portland Cement Paste