Abstract:The study aimed to elucidate the curing mechanism and establish an empirical model for the stabilization of marine organic soft clay (MOSC) using a combination of calcium carbide residue (CCR) and silica fume (SF) at the optimal proportion, employing response surface methodology (RSM) in conjunction with multi-scale characterization techniques. Initial investigations involved a series of unconfined compression strength (UCS) tests conducted on CCR and SF to ascertain the most effective dosage of each material for the stabilization of MOSC. Notably, it was observed that CCR exerted a more pronounced influence on enhancing MOSC properties when compared to SF. Further refinement of the optimal CCR-SF ratio was undertaken utilizing RSM, culminating in the establishment of a novel binder, denominated as PZ-2, with a composition ratio of 56% CCR and 44% SF. Characterization through X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), Energy-Dispersive X-ray Spectrometry (EDS) identified the primary products formed within the stabilized MOSC matrix with PZ-2 as comprising C–S–H, calcite, and dolomite. SEM analyses unveiled a substantially improved microstructure characterized by the presence of flocculent and agglomerate products in MOSC stabilized with PZ-2. Moreover, Mercury Intrusion Porosimetry (MIP) results indicated reduced pore volume in cured MOSC as opposed to its raw counterpart, indicative of a stronger microstructural configuration post-stabilization. The salutary effects of PZ-2 on MOSC stabilization were attributed to mechanisms encompassing pozzolanic reactions, neutralization, carbonation, and ion exchange. Additionally, it was noted that PZ-2 offered cost and environmental advantages over conventional Portland cement (PO 32.5). To facilitate practical applications, empirical models predicting the UCS strength of cured MOSC were developed incorporating key parameters such as initial water content ( w i ), organic matter content ( w o ), and binder content ( w b, ) with the optimal mixing ratio. These models demonstrated reliability and utility in guiding effective strategies for strengthening MOSC.

Porewater compositions of Portland cement with and without silica fume calculated using the fine-tuned CASH+NK solid solution model

Understanding the Role of Calcium Silicate Slag in Sodium Carbonate-Activated Green Materials: Influence on Kinetics, Strength, and Efflorescence

A New Hydration Kinetics Model of Composite Cementitious Materials, Part 2: Physical Effect of SCMs

Advanced modeling of compressive strength in silica-modified oil well cement: impact of silicate, aluminate, and hydraulic moduli

Prediction of Chloride Binding Isotherms for Blended Cements

A Novel Strength Model for Cement Marine Clay Based on the Mechanical-Chemical Coupling Behavior

Hydration and Mechanical Properties of High-Volume Fly Ash Concrete with Nano-Silica and Silica Fume

Effect of Chemical Composition and Network of Fly Ash Glass on the Hydration Process and Properties of Portland-Fly Ash Cement

Effect of Silica Fume on the Rheological Properties of Cement Paste with Ultra-Low Water Binder Ratio

The curing mechanism and empirical model for the marine organic soft clay stabilized with calcium carbide residue and silica fume under the optimal ratio

Strength and water absorption for gypsum—cement—silica fume blends of improved performance

A New Hydration Kinetic Model Based on Boundary Nucleation and Growth Mechanism with Time-Dependent Growth Rate: Application to Quantitively Characterize the Influence of Alkali on the Early Hydration of Cement

Early Hydration Heat of Calcium Sulfoaluminate Cement with Influences of Supplementary Cementitious Materials and Water to Binder Ratio

Thermal analysis and microstructure of Portland cement-fly ash-silica fume pastes

The Synergistic Effect of Calcained Coal-Series Kaolinite and Limestone on the Hydration of Portland Cement

A study on the hydration of calcium aluminate cement pastes containing silica fume using non-contact electrical resistivity measurement

A realistic molecular model of cement hydrates

New insights into aluminosilicate gel from acetic acid attack of hydrated Portland cement: Experimental and thermodynamic characterization

Mechanical Performance of Portland Cement, Coarse Silica Fume, and Limestone (PC-SF-LS) Ternary Portland Cements

The influence of sulfate addition on hydration kinetics and C-S-H morphology of C3S and C3S/C3A systems

Role of Siliceous Raw Materials on the Structure of Nano-CSH and Their Effect on the Properties of Cement