Abstract:The study aimed to elucidate the curing mechanism and establish an empirical model for the stabilization of marine organic soft clay (MOSC) using a combination of calcium carbide residue (CCR) and silica fume (SF) at the optimal proportion, employing response surface methodology (RSM) in conjunction with multi-scale characterization techniques. Initial investigations involved a series of unconfined compression strength (UCS) tests conducted on CCR and SF to ascertain the most effective dosage of each material for the stabilization of MOSC. Notably, it was observed that CCR exerted a more pronounced influence on enhancing MOSC properties when compared to SF. Further refinement of the optimal CCR-SF ratio was undertaken utilizing RSM, culminating in the establishment of a novel binder, denominated as PZ-2, with a composition ratio of 56% CCR and 44% SF. Characterization through X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), Energy-Dispersive X-ray Spectrometry (EDS) identified the primary products formed within the stabilized MOSC matrix with PZ-2 as comprising C–S–H, calcite, and dolomite. SEM analyses unveiled a substantially improved microstructure characterized by the presence of flocculent and agglomerate products in MOSC stabilized with PZ-2. Moreover, Mercury Intrusion Porosimetry (MIP) results indicated reduced pore volume in cured MOSC as opposed to its raw counterpart, indicative of a stronger microstructural configuration post-stabilization. The salutary effects of PZ-2 on MOSC stabilization were attributed to mechanisms encompassing pozzolanic reactions, neutralization, carbonation, and ion exchange. Additionally, it was noted that PZ-2 offered cost and environmental advantages over conventional Portland cement (PO 32.5). To facilitate practical applications, empirical models predicting the UCS strength of cured MOSC were developed incorporating key parameters such as initial water content ( w i ), organic matter content ( w o ), and binder content ( w b, ) with the optimal mixing ratio. These models demonstrated reliability and utility in guiding effective strategies for strengthening MOSC.

The curing mechanism and empirical model for the marine organic soft clay stabilized with calcium carbide residue and silica fume under the optimal ratio

Fundamental Mechanical Behavior of CMMOSC-S-C Composite Stabilized Marine Soft Clay

Investigation on the Optimal Formulation and Mechanism of Marine Organic Silt Improved with Magnesium-Cement-based Stabilizer

A Novel Strength Model for Cement Marine Clay Based on the Mechanical-Chemical Coupling Behavior

Stabilization Nature and Unified Strength Characterization for Cement-Based Stabilized Soils

Optimization of Formula for Stabilizing Muddy Soil Using Response Surface Methodology

Microstructure Refinement of Calcium-Sulfate-aluminate and Portland Cement (CSA-PC) Hybrids with Accelerated CO2 Curing (ACC)

Sustainable Building Material from CO2 Mineralization Slag: Aggregate for Concretes and Effect of CO2 Curing

Experimental study on the stabilization of marine soft clay as subgrade filler using binary blending of calcium carbide residue and fly ash

Experimental Study on Mechanical Properties of Soft Clay Stabilized by Industrial By-Products

Effect of Stabilization/solidification on Mechanical and Phase Characteristics of Organic River Silt by a Stabilizer

Investigation on the solidification effect and mechanism of loess utilizing magnesium oxysulfate cement as a curing agent

Optimization of synergy between cement, slag, and phosphogypsum for marine soft clay solidification

Strength Properties and Prediction Model of Cement-Solidified Clay Considering Organic Matter and Curing Temperature

Microstructural phase evolution and strength development of low-lime calcium silicate cement (CSC) paste incorporating ordinary Portland cement under an accelerated carbonation curing environment

MgO activated calcined marine clay and its carbonation

Distinguishing the effects of cementation versus density on the mechanical behavior of cement-based stabilized clays

Multiscale experimental analysis of marine clay stabilized with coal gangue–calcium carbide residue geopolymer

Performance Optimization of Alkaline Multi-Industrial Waste-Based Cementitious Materials for Soil Solidification

Synergetic Mechanism of Multiple Industrial Solid Waste-Based Geopolymer Binder for Soil Stabilization: Optimization Using D-Optimal Mixture Design

Effects of [math] Curing on Properties of Magnesium Oxysulfate Cement