Abstract:The study aimed to elucidate the curing mechanism and establish an empirical model for the stabilization of marine organic soft clay (MOSC) using a combination of calcium carbide residue (CCR) and silica fume (SF) at the optimal proportion, employing response surface methodology (RSM) in conjunction with multi-scale characterization techniques. Initial investigations involved a series of unconfined compression strength (UCS) tests conducted on CCR and SF to ascertain the most effective dosage of each material for the stabilization of MOSC. Notably, it was observed that CCR exerted a more pronounced influence on enhancing MOSC properties when compared to SF. Further refinement of the optimal CCR-SF ratio was undertaken utilizing RSM, culminating in the establishment of a novel binder, denominated as PZ-2, with a composition ratio of 56% CCR and 44% SF. Characterization through X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), Energy-Dispersive X-ray Spectrometry (EDS) identified the primary products formed within the stabilized MOSC matrix with PZ-2 as comprising C–S–H, calcite, and dolomite. SEM analyses unveiled a substantially improved microstructure characterized by the presence of flocculent and agglomerate products in MOSC stabilized with PZ-2. Moreover, Mercury Intrusion Porosimetry (MIP) results indicated reduced pore volume in cured MOSC as opposed to its raw counterpart, indicative of a stronger microstructural configuration post-stabilization. The salutary effects of PZ-2 on MOSC stabilization were attributed to mechanisms encompassing pozzolanic reactions, neutralization, carbonation, and ion exchange. Additionally, it was noted that PZ-2 offered cost and environmental advantages over conventional Portland cement (PO 32.5). To facilitate practical applications, empirical models predicting the UCS strength of cured MOSC were developed incorporating key parameters such as initial water content ( w i ), organic matter content ( w o ), and binder content ( w b, ) with the optimal mixing ratio. These models demonstrated reliability and utility in guiding effective strategies for strengthening MOSC.

MgO activated calcined marine clay and its carbonation

Fundamental Mechanical Behavior of CMMOSC-S-C Composite Stabilized Marine Soft Clay

Sustainable Building Material from CO2 Mineralization Slag: Aggregate for Concretes and Effect of CO2 Curing

Carbonation Curing of Industrial Solid Waste‐based Aerated Concretes

Marine Geo-Polymer Cement Treated with Seawater, Alkaline Activators, Recycled Particles from Paste, and Recycled Particles from Glass

The curing mechanism and empirical model for the marine organic soft clay stabilized with calcium carbide residue and silica fume under the optimal ratio

Alkali-Activated Binary Binders with Carbonate-Rich Illitic Clay

Effect of MgO and superfine slag modification on the carbonation resistance of phosphogypsum-based cementitious materials: Based on hydration enhancement and phase evolution regulation

Effects of reactive MgO on durability and microstructure of cement-based materials: Considering carbonation and pH value

Carbonation-hardening properties and ITZ microstructure of low-calcium CO2 sequestration binder mortar

Triple-Binder-Stabilized Marine Deposit Clay for Better Sustainability

Optimization of synergy between cement, slag, and phosphogypsum for marine soft clay solidification

Preparation of Low-Cost Magnesium Oxychloride Cement Using Magnesium Residue Byproducts from the Production of Lithium Carbonate from Salt Lakes

From marble waste to monocarboaluminate binder: role of sodium aluminate composition, calcined clay type, and curing temperature

Silty Clay Stabilization Using Metakaolin-Based Geopolymer Binder

Strength and hydration properties of reactive MgO-activated ground granulated blastfurnace slag paste

Incorporation of reactive magnesia and quicklime in sustainable binders for soil stabilisation

Effect of organic alkali on hydration of GGBS-FA blended cementitious material activated by sodium carbonate

Development of eco-friendly binder using metakaolin-fly ash–lime-anhydrous gypsum

Experimental investigation into the self-carbonation mechanism of magnesium oxide carbon sequestration foamed concrete

Microstructures and properties of alkali-activated slags with composite activator: Effects of Na2O equivalents