Abstract:Most engineering structures are exposed to various harsh environments, such as temperature fluctuations and humidity cycles, simultaneously. Additionally, moisture transfer and corrosive ion transport in concrete are driven by humidity gradients. Therefore, studying Chloride transport in concrete under constant humidity conditions is a meaningful research project. In this work, a new experimental setup was designed, and the Chloride diffusion behavior of concrete under a continuous humidity environment and NaCl immersion was investigated. Meanwhile, to accurately evaluate the internal humidity of concrete, humidity sensors were applied to the concrete. Additionally, the impacts of the water-binder ratio (w/b) and ambient humidity on the humidity diffusion coefficient, free Chloride content and bound Chloride content in concrete were evaluated. The microstructure was characterized by scanning electron microscopy, X-ray diffraction and mercury intrusion porosimetry. The results show that the content of free Chloride increases with an increasing w/b ratio. The humidity diffusion coefficient of concrete during water absorption (continuous high humidity environment) is significantly higher than that during water loss (continuous dry environment). Furthermore, under the drying condition, the Chloride content and the humidity diffusion coefficient on the concrete surface gradually increased, while during the wetting procedure, the Chloride content inside the concrete increased, and the humidity diffusion coefficient gradually decreased. However, the bound Chloride content inside the concrete is not affected by the humidity level in the environment. In the wetting environment, the calcium hydroxide in the matrix is gradually consumed, and the Chloride diffuses to the matrix to form more Friedel's salt and calcium carbonate. Moreover, lowering the w/b ratio or increasing the ambient humidity can enhance the formation of more hydrated compounds (C–S–H gel), which can reduce the total porosity and can also improve the ability of concrete to resist Chloride diffusion. Overall, this study provides a better understanding of and insight into the design and maintenance of seaside RC infrastructures.

Coupling Effect of Temperature and Relative Humidity Diffusion in Concrete under Ambient Conditions

A Coupled Hygro-Thermal Model of Early-Age Concrete Based on Micro-Pore Structure Evolution

Model for Hydration Heat of Cement in Concrete and Its Application

Concrete Thermal Cracking Analysis with Cement Hydration Model and Equivalent Age Method

Theoretical Modeling and Verification of Concrete Moisture Diffusion Surface Factor

A Mesoscale Three-Dimensional Moisture Transport Model in Concrete

Interior Humidity of Concrete under Dry-Wet Cycles

An Assessment Method of Hydration Degree of Rice Husk Ash Blended Cement Considering Temperature Effect

An Innovative Method for Mesoscale Modelling of Moisture Diffusion in Concrete

Prediction of Temperature Development of Concrete with Set-Controlling Admixture Based on A New Hydration Kinetics Model

Micro Expressions of Cement Hydration Kinetics

Effect of Elevated Temperatures on Compressive Strength of Concrete

Moisture Movement in Early-Age Concrete under Cement Hydration and Environmental Drying

An experimental study on the influence of continuous ambient humidity conditions on relative humidity changes, chloride diffusion and microstructure in concrete

Moisture Diffusion Coefficient of Concrete under Different Conditions

Effect of Different Humidity-Controlling Modes on Microstructure and Compressive Behavior of Ordinary Concrete

Theoretical model for the coupling effect of moisture transport on chloride penetration in concrete

Integrative Modeling on Self-Desiccation and Moisture Diffusion in Concrete Based on Variation of Water Content

Evaluate the effect of coarse aggregates on cement hydration heat and concrete temperature modelling using isothermal calorimetry

Numerical Analysis of Drying Shrinkage in Long Reinforced Concrete Structure

Carbonation Process Simulation for Cement-Based Materials Based on Microstructure by a Cement Hydration Model