Abstract:Most engineering structures are exposed to various harsh environments, such as temperature fluctuations and humidity cycles, simultaneously. Additionally, moisture transfer and corrosive ion transport in concrete are driven by humidity gradients. Therefore, studying Chloride transport in concrete under constant humidity conditions is a meaningful research project. In this work, a new experimental setup was designed, and the Chloride diffusion behavior of concrete under a continuous humidity environment and NaCl immersion was investigated. Meanwhile, to accurately evaluate the internal humidity of concrete, humidity sensors were applied to the concrete. Additionally, the impacts of the water-binder ratio (w/b) and ambient humidity on the humidity diffusion coefficient, free Chloride content and bound Chloride content in concrete were evaluated. The microstructure was characterized by scanning electron microscopy, X-ray diffraction and mercury intrusion porosimetry. The results show that the content of free Chloride increases with an increasing w/b ratio. The humidity diffusion coefficient of concrete during water absorption (continuous high humidity environment) is significantly higher than that during water loss (continuous dry environment). Furthermore, under the drying condition, the Chloride content and the humidity diffusion coefficient on the concrete surface gradually increased, while during the wetting procedure, the Chloride content inside the concrete increased, and the humidity diffusion coefficient gradually decreased. However, the bound Chloride content inside the concrete is not affected by the humidity level in the environment. In the wetting environment, the calcium hydroxide in the matrix is gradually consumed, and the Chloride diffuses to the matrix to form more Friedel's salt and calcium carbonate. Moreover, lowering the w/b ratio or increasing the ambient humidity can enhance the formation of more hydrated compounds (C–S–H gel), which can reduce the total porosity and can also improve the ability of concrete to resist Chloride diffusion. Overall, this study provides a better understanding of and insight into the design and maintenance of seaside RC infrastructures.

Effect of Different Humidity-Controlling Modes on Microstructure and Compressive Behavior of Ordinary Concrete

Effect of Moisture Content and Porosity on Compressive Strength of Concrete During Drying at 105 °C

Coupling Effect of Temperature and Relative Humidity Diffusion in Concrete under Ambient Conditions

Transport properties of concrete after drying-wetting regimes to elucidate the effects of moisture content, hysteresis and microcracking

Moisture Diffusion Coefficient of Concrete under Different Conditions

Experimental Study on the Internal Relative Humidity in Concrete under Dry-Wet Cycles

An experimental study on the influence of continuous ambient humidity conditions on relative humidity changes, chloride diffusion and microstructure in concrete

Interior Humidity of Concrete under Dry-Wet Cycles

A Coupled Hygro-Thermal Model of Early-Age Concrete Based on Micro-Pore Structure Evolution

Time-varying moisture characteristics and C-S-H gel properties of concrete in dry and hot environments

Influence of Relative Humidity on Shrinkage of Mortar and Concrete

Moisture Movement in Early-Age Concrete under Cement Hydration and Environmental Drying

Effect of steam curing regimes on temperature and humidity gradient, permeability and microstructure of concrete

Hydration and pore structure characteristics of concrete incorporating internal curing materials in a dry and large-temperature-difference environment

Microstructural changes of young cement paste due to moisture transfer at low air pressures

Influences of water by cement ratio on mechanical properties of mortars submitted to drying

Effect of thermal fatigue on mechanical properties and microstructure of concrete in constant ambient humidity

Effect of Pore Liquid Viscosity on the Dynamic Compressive Properties of Concrete

Influences of short-term heavy rainfall on interlayer properties and microstructure of concrete dam

Experimental Study of Thermal-Hydraulic-Mechanical Coupling Behavior of High-Performance Concrete

Effects of Water-to-Cement Ratio on Pore Structure Evolution and Strength Development of Cement Slurry Based on HYMOSTRUC3D and Micro-CT