Abstract:Changing the water-to-cement ratio is one of the major ways to develop cement slurry with different densities, which in turn will greatly affect the pore structure and mechanical properties of cement slurry. In the current study, the cement hydration model HYMOSTRUC3D was used to investigate the effects of water-to-cement (w/c) ratio (0.40, 0.44, 0.50) on the pore structure evolution and strength development of cement slurry. The microstructure of the cement stone was characterized via scanning electron microscope (SEM) and micro-computed tomography (micro-CT), and the mechanical strength of the cement stone was tested and analyzed via a mechanical tester. The simulated compressive strength and capillary porosity are in good agreement with the measured data, where the relative error between the simulated results and measured results are within 0.6~10.7% and 13.04~25.31%, respectively. The capillary porosity is proved as the main factor affecting the compressive strength of cement stone with different w/c ratios. Herein, the mathematical relationship between the measured capillary porosity and compressive strength could be well fitted via the mathematical prediction models of the Balshin function (R2 = 0.95), Ryshkewitch function (R2 = 0.94), Schiller function (R2 = 0.96), and the linear regression function (R2 = 0.95). Moreover, the linear regression function (y = −2.38x + 82.76) can be used to characterize and predict the quantitative relationship between the compressive strength and capillary porosity of cement stone. The findings in this study will provide a reference value in the fields of oil and gas cementing and building concrete.

Influences of water by cement ratio on mechanical properties of mortars submitted to drying

Influence of Free Water Content on the Compressive Mechanical Behaviour of Cement Mortar under High Strain Rate

Influence of Sand-Cement Ratio and Polycarboxylate Superplasticizer on the Basic Properties of Mortar Based on Water Film Thickness

Influence of moisture condition on chloride diffusion in partially saturated ordinary Portland cement mortar

The Mechanical Properties of Polymer-cement Mortar

INFLUENCE OF PRE-CRACKING OVER WATER DESORPTION IN CEMENT PASTES AND MORTARS

Experimental Study of the Water Desorption and Drying Shrinkage of Cement-Based Materials with Thin Slices

Drying Shrinkage of Cement-Based Materials under Conditions of Constant Temperature and Varying Humidity

Quantifying Isothermal Drying of Cement Mortars in View of Water Sensitivity

Experimental Investigation on the Effect of High-Pressure Water on Tensile Strength and Microstructure of Cementitious Materials

Study on the Deterioration Process of Cement‐based Materials under Sulfate Attack and Drying–wetting Cycles

Effect of Moisture Content and Porosity on Compressive Strength of Concrete During Drying at 105 °C

Water to Cement Ratio Effect on Cement Paste Microstructural Development by Electrical Resistivity Measurements and Computer Illustration

Influence of water-repellent admixtures ( Sitren and Stearate materials) on the microstructure and mechanical performance of conventional Portland cement paste and mortar

Effects of Water-to-Cement Ratio on Pore Structure Evolution and Strength Development of Cement Slurry Based on HYMOSTRUC3D and Micro-CT

Transport properties of concrete after drying-wetting regimes to elucidate the effects of moisture content, hysteresis and microcracking

Influence of Porosity on Compressive and Tensile Strength of Cement Mortar

Isothermal Drying Process and Its Effect on Compressive Strength of Concrete in Multiscale

Effect of Strain Rate and Water-to-cement Ratio on Compressive Mechanical Behavior of Cement Mortar

Effect of Curing Conditions on Pore Structure of Cement Based Materials

A Study on the Mechanical and Wear-Resistance Properties of Hybrid Fiber Mortar Composites with Low Water-Cement Ratios