Abstract:<p>Thermal and autogenous deformations of high-performance concrete at early ages have significant impact on the performance, serviceability, and durability of concrete structures. While substantial past research has significantly improved our fundamental understanding of the autogenous shrinkage and of the coefficient of thermal expansion (CTE) of cement paste and mortar, such understanding for concrete, especially modern types of high-performance concrete at early ages, remains inadequate. Accordingly, a new Temperature Stress Testing Machine (TSTM) capable of generating reliable data on autogenous shrinkage and CTE of concrete from very early ages has been built. After a review of relevant major aspects, key features of the newly-built TSTM are reported, with a focus on advanced thermal regulation and deformation capturing systems. The outcomes of a study using the newly-developed TSTM on autogenous deformation and CTE of early-age concrete (two mixtures with water-to-binder ratio of 0.35 and 0.42) subject to different curing temperatures (23, 35 and 45 °C) are then presented. Higher curing temperatures significantly accelerate the development of autogenous shrinkage at very early ages, whereas after the initial period, the magnitude of autogenous shrinkage cured at the intermediate temperature of 35 °C gradually becomes the largest. Despite this cross-over, the maturity concept appears appropriate to approximate the effect of curing temperature on autogenous shrinkage of concrete at early ages. The linear CTE of early-age concrete, obtained using stepped temperature profiles follows a clear rising trend after setting. Based on the newly-measured CTE, an attempt was made to separate thermal strain and self-desiccation shrinkage, in which the presence of non-negligible delayed thermal strain became evident.</p>

Experimental study on the thermal expansion coefficient of high-strength/performance concrete at early ages

The Early-Age Drying Shrinkage of Cement-Based Materials with the Same Workability after Temperature Compensation

Temperature-Dependent Coefficient of Thermal Expansion of Concrete in Freezing Process

Autogenous deformation and coefficient of thermal expansion of early-age concrete: Initial outcomes of a study using a newly-developed Temperature Stress Testing Machine

Influence of Mineral Admixtures on early Shrinkage of Ordinary Concrete

A study on early shrinkage of recycled concrete

Experimental study on strength growth of low temperature curing concrete

Early Age Properties and Cracking Control of Concrete

Influence of Early-age Curing Time on Shrinkage of Concrete

YOUNG CONCRETE THERMAL CRACKING CONTROL BASED ON EQUIVALENT AGE METHOD

EXPERIMENTAL INVESTIGATION ON CONCRETE PERFORATED BRICK WALL SHINKAGE AT DIFFERENT AGES

Application of Equivalent Age Method to Concrete Thermal Cracking Control at Early Ages

Experimental and Theoretical Studies on Autogenous Shrinkage of Concrete at Early Ages

Experimental study on early shrinkage and later expansion of concrete under a simulated geothermal environment

Decoupling of Autogenous Shrinkage and Tensile Creep Strain in High Strength Concrete at Early Ages

Study on Performance of High Strength Concrete at Early Age

Autogenous shrinkage of high performance concrete containing mineral admixtures under different curing temperatures

Influence of Superplasticizer and Shrinkage-Reducing Admixtures on Early Age Shrinkage of Concrete

Experimental Investigation of the Static Expansion Tensile Behavior of Concrete after Exposure to Elevated Temperatures

Interior Relative Humidity of Normal- and High-Strength Concrete at Early Age

Experimental Study on Early Drying Shrinkage of Self-compacting Barite Concrete