Abstract:A cryogenic hose is used to transport liquefied natural gas at sea, where flexible fittings are sealed by corrugated lining and end flange welding. However, the extreme cryogenic temperatures of the conveyed fluid introduce substantial challenges to the integrity of the fitting seals' structure during the LNG transfer process. In order to study the sealing performance of the fitting under LNG conveying conditions, this paper was based on the general finite element software ABAQUS 6.11 to carry out a thermo-mechanical coupling analysis of the end sealing stress. This paper also established a sealing performance analysis model of the corrugated fitting welding area under the fitting action of LNG load and internal pressure load. A sensitivity analysis was conducted on the influence of weld clearance, blunt edge size, and weld residual height on the weld stress of a fitting ring. The results show that, under the combined action of the medium internal pressure and cryogenic load, the size design of the weld area significantly affects the sealing performance of the fitting, among which the equivalent force of the weld clearance butt sealing area has the greatest impact. Moreover, it was found that a pressure of 5 MPa was 2 mm when the weld clearance was 2 mm, and the average stress at the weld was 53.68 MPa. Further, considering the synergistic influence of the blunt edge size, the weld clearance was 3 mm, the stress was minimal when the blunt side size was 4 mm, and the average stress was 17.42 MPa. These research results can serve as a reference for the design and analysis of the sealing structure of non-adhesive inner corrugated cryogenic hose fittings.

Experimental study on the performance of cryogenic seal structure with indium

Experimental Study on Dynamic Sealing Performance under High Pressure and High Speed

Simulation and analysis of dynamic heat transfer inside a cryogenic valve under cryogenic test

Study of Surface Flashover and Breakdown Characteristics in Liquid Nitrogen for Sfcl Application

FLUID DYNAMICS AND CONTACT STRESS ON HARD SEALING SURFACE ANALYSIS OF LNG CRYOGENIC BALL VALVE

Leakage Analysis and Ground Tests of Knife Edge Indium Seal to Lunar Sample Return Devices

Research on Sealing Structure and Ground Test of Lunar Sample Return Devices

Experimental Study of Static Sealing Structure with Large Diamter and Sealing Gap Using Magnetic Fluid

Experimental and numerical stady on temperature field of mechanical seal

Theoretical and experimental research towards labyrinth sealing mechanism of liquid nitrogen in the cryogenic spindle

Fretting behavior of static metal seal and testing apparatus for fretting friction with low/high temperature

Experimental investigation on frictional behavior and sealing performance of different composites for seal application

Effect of two-phase flow lubrication on sealing performance of spiral groove mechanical seal under high speed and low temperature conditions

Thermo-Mechanical Coupling Analysis of the Sealing Structure Stress of LNG Cryogenic Hose Fittings

Sealing Performance of Adaptive Contacting Mechanical Seal

Experimental study on friction and wear behaviour of amorphous carbon coatings for mechanical seals in cryogenic environment

Experimental Study of Static Sealing of Large Flanges with Magnetic Fluid

Study on Frictional Performance of Mechanical Seal Spare Material Used for Nuclear Coolant Pump

Finite ElementAnalysis of Sealing Performance and Stress Intensity of the Flange

Sealing Performance Evaluation and Structural Optimization for Reducing Leakage Failures of Lip Seal Considering High-Speed Rotation Frictional Heat

Design and Analysis of Cooling Structure for Dry Gas Seal Chamber of Supercritical Carbon Dioxide Turbine Shaft End