Abstract:The sealing of large diameter rotating shaft in some special applications especially in aerospace and military industry needs to be sealed with magnetic fluids. However, the major problems of restricting the application of large diameter magnetic fluid rotary seal is the decrease of the pressure-resistance capacity of magnetic fluid seal at high temperatures and the bigger breakaway torque at low temperatures. To research effect of the temperature on the pressure-resistance capacity and breakaway torque of large diameter magnetic fluid seal, a sealing device with the diameter size of rotary shaft for 190 mm and the sealing gap for 0.1 mm was designed. Through the experimental test studied on the pressure-resistance capacity at -55 degrees C-70 degrees C and the breakaway torque at -55 degrees C-20 degrees C, exploring the influence rules of injection volumes of magnetic fluid and the standing time on the breakaway torque under at -55 degrees C. The experimental results show that the decrease of the saturation magnetization of magnetic fluid at high temperatures result in the pressure-resistance capacity falls, and the increase of the magnetic fluid viscosity at low temperatures is the key factors which causes the bigger breakaway torque. In theory, the analytical expression of between the viscous drag torque and the temperatures were derived, which could qualitatively explain the experimental rules of between the breakaway torque and the temperature at -55 degrees C-20 degrees C. In addition, the breakaway torque of magnetic fluid seal increases as the addition of the standing time and eventually becomes stable at -55 degrees C, and between the breakaway torque and the injection volumes of magnetic fluid showed a linearly change.

Experimental Study of Static Sealing of Large Flanges with Magnetic Fluid

Structure Design of Magnetic Fluid Static Seal at Large Diameter Flange

Experimental Study of Static Sealing Structure with Large Diamter and Sealing Gap Using Magnetic Fluid

Research on a Large Diameter Magnetic Fluid Seal with Thin-Wall Parts

Magnetic field finite element analysis and experimental verification of magnetic fluid seal with large gap

Theoretical Analysis and Experimental Study on the Influence of Magnet Structure on Sealing Capacity of Magnetic Fluid Seal

Analysis and Experimental Study on Magnetic Fluid Seal Mechanism

Numerical and Experimental Study of Magnetic Fluid Seal with Large Sealing Gap and Multiple Magnetic Sources

Numerical and Experimental Studies of Alternative Combined Magnetic Fluid and Labyrinth Seal with Large Gap

Analytical and Experimental Study of Sealing Behavior at Water and Magnetic Fluid Interface

Experimental Investigation of Diverging Stepped Magnetic Fluid Seals with Large Sealing Gap

Study on the Seal of Tank Panoramic Sight with Magnetic Fluid

Numerical Analysis and Experiment Study of Magnetic Fluid Boundary in Seals

Theoretical Analysis and Experimental Study of the Characteristics of Magnetic Fluid Seal with a Large Diameter at High/low Temperatures

Theory Analyses and Applications of Magnetic Fluids in Sealing

Studies of Magnetic Fluid Plane Sealing in Split Sealing Device

Study on the technology of combined seal of magnetic fluid seal and mechanical seal

Experimental Research on the Seal of Non-Newtonian Magnetic Grease with High Viscosity

Magnetic field simulation and experimental investigation of magnetic fluid seal based on rotating shaft

Comparative study of the fai lure pressure between seal ing l iquids and gas with magnetic fluid

Influence of Viscosity and Magnetoviscous Effect on the Performance of a Magnetic Fluid Seal in a Water Environment