Abstract:Supercritical CO2 (S-CO2) leakage through seals significantly reduces the efficiency of turbomachinery. Improving the labyrinth seal structure is potentially the key to the reduction of the leakage flow rate, but its application is greatly limited by the uncertainties of supercritical CO2 turbulent flow inside the turbomachines with irregular chambers. In this work, we numerically investigated the S-CO2 flow field and dissipation rate of turbulence kinetic energy in stepped labyrinth seals. The RANS method and hexahedral structural mesh were employed. The look-up table containing the real gas properties of carbon dioxide was created and imported into the flow solver. The developed numerical method was validated by experiment results and proved its applicability. We have discovered that the fully developed rotating vortices inside each chamber of the turbomachine significantly increase the turbulent dissipation rate and decrease the fluid carried energy, thus reducing the leakage flow rate. With the seal clearance increasing form 0.5 mm-1.3 mm at pressure ratio pi = 0.7, the vortices development is gradually limited, causing the decrease of turbulent dissipation rate. The leakage rate is found to be heavily dependent on the distance between the seal tip and step. The increase in this distance from 2 mm to 6 mm results in greater space for the continued development of the vortices within the first chamber, thus the enhancement of the turbulent dissipation rate of fluid. Therefore, we defined a geometry coefficient, (delta-b)/s, and analyzed its effects on turbulent dissipation rate and leakage flow rate. With this geometry coefficient increases from 2.8 to 11.2 at pi = 0.7, the maximum turbulent dissipation rate increases from 7.09 x 107 to 1.23 x 108 and the leakage flow rate decreases from 3.98 x 10-2 kg/s to 1.62 x 10-2 kg/s. An improved leakage model characterizing seal geometry, gas properties and compressibility effects was proposed.

Theoretical and experimental research towards labyrinth sealing mechanism of liquid nitrogen in the cryogenic spindle

Experimental study on the performance of cryogenic seal structure with indium

Numerical Investigation on the Effects of Structural Parameters of Labyrinth Cavity on Sealing Performance

Influence of Tooth Geometrical Shape on the Leakage and Rotordynamic Characteristics of Labyrinth Seals in a Cryogenic Liquid Turbine Expander

Numerical Calculation of Nonlinear Dynamic Characteristics for Labyrinth Seals

NUMERICAL ANALYSIS OF LEAKAGE FLOW THROUGH TWO LABYRINTH SEALS

Influence of Gas Condensability on Labyrinth Seal's Sealability

Study On Leakage In Labyrinth Seals System Of A Turbine

Experimental and Numerical Investigations on the Leakage Flow Characteristics of Labyrinth Seals

Turbulence Dissipation of Leakage Flow in Supercritical CO2 Labyrinth Seals

Numerical Investigation on Labyrinth Seal Leakage Flow and Its Effects on Aerodynamic Performance for a Multistage Centrifugal Compressor

Dynamic Characteristics Numerical Calculation of Labyrinth Seal in Experimental Table by CFX

An analytical study of the effect of different eccentricity and whirling speed on labyrinth seal forces and dynamics parameters

Effect Research of Labyrinth Seal Structure and Dynamics Parameters

Labyrinth seal leakage and dynamics characteristics analysis based on Black Model

Effect of two-phase flow lubrication on sealing performance of spiral groove mechanical seal under high speed and low temperature conditions

Numerical Study of Leakage and Rotordynamic Performance of Staggered Labyrinth Seals Working with Supercritical Carbon Dioxide

Investigation and Improvement of the Staggered Labyrinth Seal

Experiment on Leakage Flow Characteristics of Labyrinth Seal

Leakage and whirl speed study in labyrinth seal using CFD.

Labyrinth Seal Design for Space Applications