Determination of the Equivalent Rotordynamic Coefficients and Leakage of a T-Type Labyrinth Seal

A. Untaroiu,Muhammad Mubashar Ashraf

DOI: https://doi.org/10.1115/fedsm2024-131377

2024-07-15

Abstract:Rotating machinery requires adequate sealing to reducing the secondary leakage between high-pressure and low-pressure regions and in turn improve efficiency. Different types of annular gas seals are used for multiple turbomachinery applications. This includes finger, leaf, brush (for more specialized applications), hole and honeycomb patterned seals. In comparison to other configurations, labyrinth seals are most commonly used due to their high robustness and low manufacturing costs in rotating machinery applications. The recently introduced T-type labyrinth seal has the potential to reduce the fluid-induced excitations in the aero-engines in comparison to conventional ones. Seal clearance from the rotor surface plays an important role in the performance and efficiency of the seal in terms of rotor dynamics and leakage rate. Therefore, a parametric analysis is required to determine the optimal clearance which not only reduces the leakage but also minimizes the overall contribution to the vibration of the system. It is known that the T-type seals have T shape teeth which provide a greater increase in the inward radial aerodynamic force. This inward force is due to the enhanced Lomakin effect of the seal flow field. The earlier research has shown that the leakage of T-type labyrinth seal is approximately 23.6% to 25.3% less than the straight through (i.e., conventional) labyrinth seals by keeping the same tip clearance and axial length for the seal. This paper focuses on the sensitivity analysis using the design of experiments (DOE) along with the steady-state computational fluid dynamics (CFD) to determine the optimum tip clearance for the reduced leakage rate of a T-type labyrinth seal. Since the fluid-induced excitations play a significant role in the rotordynamic system, equivalent rotordynamic coefficients are extracted using steady-state CFD simulation based on the circular whirl orbit and perturbation analysis, where the small perturbation is applied to the rotor, which is generally 10% of the seal clearance. In this study, conventional labyrinth seal is numerically modelled, and then verified through test results existing in the literature. In addition, the numerical results are compared with existing simulation results in literature. The effective damping of conventional and T-type labyrinth seals is also calculated using the equivalent rotordynamic coefficients. The previous research on the T-type seals is used for benchmarking and validation of the analysis.

Engineering,Materials Science