Abstract:Rotating machinery requires adequate sealing to reducing the secondary leakage between high-pressure and low-pressure regions and in turn improve efficiency. Different types of annular gas seals are used for multiple turbomachinery applications. This includes finger, leaf, brush (for more specialized applications), hole and honeycomb patterned seals. In comparison to other configurations, labyrinth seals are most commonly used due to their high robustness and low manufacturing costs in rotating machinery applications. The recently introduced T-type labyrinth seal has the potential to reduce the fluid-induced excitations in the aero-engines in comparison to conventional ones. Seal clearance from the rotor surface plays an important role in the performance and efficiency of the seal in terms of rotor dynamics and leakage rate. Therefore, a parametric analysis is required to determine the optimal clearance which not only reduces the leakage but also minimizes the overall contribution to the vibration of the system. It is known that the T-type seals have T shape teeth which provide a greater increase in the inward radial aerodynamic force. This inward force is due to the enhanced Lomakin effect of the seal flow field. The earlier research has shown that the leakage of T-type labyrinth seal is approximately 23.6% to 25.3% less than the straight through (i.e., conventional) labyrinth seals by keeping the same tip clearance and axial length for the seal. This paper focuses on the sensitivity analysis using the design of experiments (DOE) along with the steady-state computational fluid dynamics (CFD) to determine the optimum tip clearance for the reduced leakage rate of a T-type labyrinth seal. Since the fluid-induced excitations play a significant role in the rotordynamic system, equivalent rotordynamic coefficients are extracted using steady-state CFD simulation based on the circular whirl orbit and perturbation analysis, where the small perturbation is applied to the rotor, which is generally 10% of the seal clearance. In this study, conventional labyrinth seal is numerically modelled, and then verified through test results existing in the literature. In addition, the numerical results are compared with existing simulation results in literature. The effective damping of conventional and T-type labyrinth seals is also calculated using the equivalent rotordynamic coefficients. The previous research on the T-type seals is used for benchmarking and validation of the analysis.

Leakage and Rotordynamic Performance of T Type Labyrinth Seal

Determination of the Equivalent Rotordynamic Coefficients and Leakage of a T-Type Labyrinth Seal

Labyrinth Seal Rotordynamic Characteristics Part II: Geometrical Parameter Effects

Rotordynamic Characteristics of the Straight-Through Labyrinth Seal Based on the Applicability Analysis of Leakage Models Using Bulk-Flow Method

Labyrinth Seal Rotordynamic Characteristics Part I: Operational Conditions Effects

Rotordynamic Analysis and Leakage Performance Study of a Hole Diaphragm Labyrinth Seal Using the CFD Method

Influence of Tooth Geometrical Shape on the Leakage and Rotordynamic Characteristics of Labyrinth Seals in a Cryogenic Liquid Turbine Expander

Rotordynamic Characteristics of a Novel Labyrinth Seal with Partition Walls and Helical Groove Teeth

Numerical comparisons of rotordynamic characteristics for three types of labyrinth gas seals with inlet preswirl

Numerical Calculation of Nonlinear Dynamic Characteristics for Labyrinth Seals

Transient investigations of teeth on rotor and teeth on stator modified labyrinth seals

Experimental and Numerical Investigations on the Leakage Flow Characteristics of Labyrinth Seals

Effects of Reynolds Number and Tooth Front Angle on Leakage Loss and Heat Transfer Characteristics in a Rotating Labyrinth Seal

Investigation of Leakage and Heat Transfer Properties of the Labyrinth Seal on Various Rotation Speed and Geometric Parameters

Investigations on the Leakage Characteristics and Rotordynamic Coefficients of Labyrinth Seal with Tooth Bending Damage

Interaction Between Rotor and Annular Seals: Interlaced and Straight-Through Labyrinth Seals

Leakage and critical speed effect of labyrinth seal structure

Influence of leakage flow through labyrinth seals on rotordynamics: numerical calculations and experimental measurements

Enhanced Rotordynamic Performance under Various Structural Arrangements of Hole Diaphragm Labyrinth Seal

Simulation and Flow Analysis of the Hole Diaphragm Labyrinth Seal at Several Whirl Frequencies

Effect of Teeth Bending and Mushrooming Damages on Leakage Performance of a Labyrinth Seal