Abstract:Ba0.7Sr0.3TiO3 (BST30) thin films, deposited on single crystal Si (100) substrates with or without a MgO(001) buffer layer by the sol-gel method, have been investigated for their optical properties with a visible reflection spectrophotometer. An improved simplex numerical optimization method based on the reflectance spectra fitting is utilized to obtain the refractive indices and thicknesses of the thin films. Two models for the refractive index variations of the films (with or without a MgO buffer layer) together with a resemble double-layer structure are used to describe the films. The crystallization and microstructure of the films are characterized by the field emission scanning electron microscopy, which indicates that the MgO(001) buffer layer can significantly hold up the interdiffusion between the BST30 layer and the Si substrate, acuminate the interfaces, and improve the crystallinity of the BST thin film deposited on it. Furthermore, due to the large difference between the refractive index of the BST30 thin film and that of the MgO(001) buffer layer, which results in a strong beam confinement, a desirable waveguide structure could be constructed. (C) 2009 American Institute of Physics. [doi:10.1063/1.3232225]

Characteristics of silicon-based BaxSr1-xTiO3 thin films prepared by a sol-gel method

Microstructure And Electrical Properties Of (Ba,Sr)Tio3 Thin Films Prepared By A Sol-Gel Method

Determination Of Refractive Indices And Thicknesses Of Ba0.7sr0.3tio3 Films With And Without Mgo (001) Buffer Layer On Silicon Substrate

Structure and Ferroelectric Properties of Barium Titanate Films Synthesized by Sol–gel Method

Preparation and Dielectric Properties of BST Films Deposited on Ti5Si3 Electrode Layer

Preparation and characterization of crystalline Ba0.5Sr0.5TiO3 thin films on FTO transparent electrodes

Preparation of (1− <i>x</i> %)(Na<sub>0.5</sub>Bi<sub>0.5</sub>)TiO<sub>3</sub>– <i>x</i> %SrTiO<sub>3</sub> thin films by a sol–gel method for dielectric tunable applications

Preparation of (1− x %)(Na 0.5 Bi 0.5 )TiO 3 – x %SrTiO 3 thin films by a sol–gel method for dielectric tunable applications

Characterization Of Mn-Doped Ba1-Xsrxtio3 Thin Films Prepared By The Sol-Gel Method

BST Thin Film Deposited on Glass Substrate with TISI Nanowire Electrode by RF-Sputtering Method

Preparation and Characterization for B3.15Nd0.85Ti3O12 Thin Film by Sol-Gel Process

Electrical Properties of Crystalline Ba0.5Sr0.5TiO3 Thin Films

Barium strontium titanate (BST) thin film analysis on different layer and annealing temperature

Microstructure And Ferroelectric Properties Of Sol-Gel Derived Bi3.15nd0.85ti3o12 Thin Films On Pt/Ti/Sio2/Si(100)

Enhanced Piezoresponse and Dielectric Properties for Ba1-XSrXTiO3 Composition Ultrathin Films by the High-Throughput Method

Preparation and Properties of (Ba-X,sr1-x)tio3 Thin Film for High Density Dram Application

Composition and shape control of single-crystalline Ba1-xSrxTiO3 (x=0-1) nanocrystals via a solvothermal route

Manipulation of phase transitions and electrical properties of Ba<sub>1-x</sub>Sr<sub>x</sub>TiO<sub>3</sub> thin films through orientation engineering

PREPARATION OF CALCIUM DOPED STRONTIUM BISMUTH TITANATE FERROELECTRIC THIN FILMS BY SOL-GEL PROCESSING

Preparations and Dielectric Properties of Ba0.80Sr0.20TiO3/PbO–B2O3 Thick Films

Thermo-Sensitive Ba 0.64 Sr 0.36 TiO 3 Thin Film Capacitors for Dielectric Type Uncooled Infrared Sensors