Abstract:Continuous SiC fibers have attracted increasing research interest for their significant application in aerospace and nuclear energy. Control of inhomogeneity and decrement of defects are crucial for improving the mechanical and high-temperature performance of SiC fibers. Thus an understanding of fine and detailed microstructural and microchemical distribution of SiC fibers is urgently needed. In the present work, the cross-sectional phase distributions, morphologies and defects of amorphous, non-stoichiometric and near-stoichiometric SiC fibers were well characterized. From surface to core, the amorphous and non-stoichiometric fibers exhibited uniform microstructures, but a gradient change along the radial direction was observed in the near-stoichiometric fiber. Nanosized SiC and turbostratic carbon (2-4 nm) were randomly distributed inside the amorphous fiber. A large amount of graphite surrounding SiC grains appears in the non-stoichiometric fiber which possess low strength and weak thermal stability. The near-stoichiometric fiber has transgranular fracturing, high strength and favorable thermal stability, and the graphite planes are turbostratic inside the fiber but straight on the surface. The results of both energy-dispersive X-ray spectrometry measurements and first-principles calculations demonstrate that Al atoms can occupy Si sites in the SiC grains. Our findings offer fine understanding for fabricating SiC fibers with superior properties.

Anomalous Characteristics Of The Microcrystalline State Of Sic Fibers

Preparation and Properties of Sic Fiber with A Stable Excess Carbon Layer on the Surface

Fabrication of Sic Fibres from Yttrium-Containing Polycarbosilane

Melt Spun of Continuous Polycarbosilane Fibers

Characterization and Microstructural Evolution of SiC(OAl) Fibers to SiC(Al) Fibers Derived from Aluminum-Containing Polycarbosilane

Preparation And Microwave-Absorbing Properties Of Some Non-Circular Sic Fibers

Synthesis of Crystalline Sic Nanofiber Through the Pyrolysis of Polycarbomethylsilane Coated Platelet Carbon Nanofiber

The Preparation and Properties of High Temperature Resistant Sic(Al) Fibers

A Near-Stoichiometric Sic-Based Fibre Obtained from A Polyaluminocarbosilane Precursor

Ceramic Fibers From Polymer Precursor Containing Si-O-Ti Bonds .2. Synthesis Of Various Types Of Ceramic Fibers

A Detailed Study of the Microstructure and Thermal Stability of Typical SiC Fibers

Ceramic fibres from polymer precursor containing Si-O-Ti bonds

Preparation of SiC ceramic fiber from a photosensitive polycarbosilane

STUDY OF HIGH TEMPERATURE RESISTANT SiC(Al) FIBERS PRECURSOR-POLYALUMINOCARBOSILANE FIBERS

Synthesis and characterization of silicon carbide fibers by chemical vapor growth

Preparation and properties of non-circular cross-section SiC fibers from a preceramic polymer

Amorphous Fine-Diameter SiC-based Fiber from a Boron-Modified Polytitanocarbosilane Precursor

Silicon Carbide Base Ceramic Fiber Synthesis from Polycarbosilane-Modified Polymethylsilane Blend Polymers by Melt Spinning

Preparation of SiC-C fiber by polycarbosilane synthesized by co-pyrolysis of PDMS and PVC

Continuous Sic(Oal) Fiber from Polymer Precursor

SiC fiber derived from precursor polymer