Abstract:Reducing the Oxygen content in SiC fibers is important to enhance the high-temperature resistance of the fibers. For this aim, the low-molecular-weight polycarbosilane(LM-PCS) was recomposed into high-molecular-weight PCS(HM-PCS) which was then dissolved in xylene to form the spinning solutions of different concentration of the precursors. Subsequently, PCS fibers were dry spun from the solutions, and were pyrolyzed into the SiC fibers. The oxygen content in the fibers formed under a special heating procedure without air-curing was 3.41wt%. The tensile strength of the fibers retained 91% after heat treatment for 1 h in air at 1000 degrees C. The removal of the residual solvent, the self cross-linking process and the ceramization process during the fiber formation were followed by IR, XRD, SEM, gel content and TG-DTA of green PCS fibers. Four stages of reactions were involved in the pyrolysis process of PCS fibers with the increase of temperature: (1) T <250 degrees C: the volatilization of the moisture absorbed from atmosphere and the residual amounts of solvent, (2) T = 250 similar to 550 degrees C: self cross-linking between molecules, (3) T=550 similar to 750 degrees C: transformation of the polymer to ceramics and (4) T=750 similar to 1250 degrees C: transformation of the amorphous phase to crystallization. Self cross-linking was mainly the cross-linking between Si H bonds and Si-CH3 bonds in the range of 250 similar to 550 degrees C. During the self cross-linking, a small amount of oxygen from the atmosphere went into the cross-linking reaction.

Silicon Carbide Base Ceramic Fiber Synthesis from Polycarbosilane-Modified Polymethylsilane Blend Polymers by Melt Spinning

Preparation of Silicon Carbide Fibers from the Blend of Solid and Liquid Polycarbosilanes

Preparation of Low Oxygen SiC Fiber by Dry Spinning

Preparation of SiC-C fiber by polycarbosilane synthesized by co-pyrolysis of PDMS and PVC

Melt Spun of Continuous Polycarbosilane Fibers

Synthesis and Spinnability of Vinyl-Grafted Carbon Nanotubes /polycarbosilane Precursor with High Ceramic Yield

Modification of polycarbosilane as a precursor with high ceramic yield for oxygen-free SiC fibers

Synthesis of cyano-polycarbosilane and investigation of its pyrolysis process

Preparation of SiC ceramic fiber from a photosensitive polycarbosilane

Synthesis of Polycarbosilane from Polydimethylsilane Athigh Temperature and High Pressure

Facile Synthesis of Melt-Spinnable Polyaluminocarbosilane Using Low-Softening-point Polycarbosilane for Si–C–Al–O Fibers

Synthesis and Characterization of Molybdenum‐modified Polycarbosilane for SiC(Mo) Ceramics

Synthesis of Polycarbosilane from Liquid Polysilane at the High Temperature and under High Pressure

The Favorable Effects of Incorporating Bulky Rigid Moieties into Polymethylsilane (PMS) on the Melt‐Spinnability of Its Derived Preceramic Polymer

Preparation of Hybrid Polymer As a Near-Stoichiometric SiC Precursor by Blending of Polycarbosilane and Polymethysilane

Synthesis and characterization of precursor polyaluminocarbosilane (PACS) of SiC(Al) ceramic fibers with excellent spinnability

Thermal Stability and Curing Kinetics of Polycarbosilane Fibers

SYNTHESIS OF SILICON CARBIDE FIBER FROM POLYCARBOSILANE USING ELECTRON BEAM IRRADIATION UNDER LOW OXYGEN PARTIAL PRESSURE

Modification of polycarbosilane by polyborazine as a precursor for oxygen-free SiC fibersElectronic supplementary information (ESI) available: DSC thermograms; molecular weight distributions; chromatograms of hydrogen evolution; 29Si NMR spectra. See http://www.rsc.org/suppdata/jm/b3/b303573e/

Synthesis of Polytitanocarbosilane and Preparation of Si–C–Ti–B Fibers

The preparation of SiC ultrafine fibers containing low amount of oxygen by the electrospinning and pyrolysis of vinyl-modified polycarbosilane