Abstract:Abstract There are significant challenges for materials in extreme environments for a variety of applications such as aircraft engines, gas turbines, nuclear reactors, reentry vehicles, and hypersonic structures. Ceramic matrix composites (CMCs) could be ideal candidates to meet these stringent requirements for materials due to their high melting temperatures, high oxidation, corrosion and ablation resistance, low creep, and thermal cycling behavior in such extreme environments. Particularly, continuous fibers can bridge cracks in CMCs and therefore improve the strength and fracture toughness of composites. CMCs are traditionally manufactured by the melting infiltration method. With this method, the high porosity and brittle structure of fabricated CMCs are not capable of withstanding high mechanical and thermal loads. Alternatively, polymer derived ceramic composites are fabricated by incorporating carbon fibers into polymer derived ceramic matrix to achieve high fracture toughness. With the aid of protective coatings with metallic or ceramic materials, such as Nickel and boride nitride, carbon fiber could potentially withstand high temperatures without oxidation. In this study, continuous fiber reinforced silicon oxycarbide composite was manufactured with polysiloxane (PSX) resin and woven carbon fabrics through the polymer infiltration and pyrolysis process (PIP). Re-infiltration of the PSX resin into the composites, curing in an autoclave, and pyrolysis for additional 2 to 10 cycles can increase the yield of ceramics of the composites. A dense structure of the composites was observed by SEM. The EDS results showed that the elemental composition of the composites mainly consisted of carbon, silicon and oxygen. The crystalline structure of the composites was examined through XRD to indicate the degree of polymer pyrolysis to ceramics. The results of four-point bending testing of the composites showed a flexural strength of 62.17MPa, a flexural modulus of 51.30GPa, and a fracture toughness of 1.3 × 108J/m3.

Progress of silicon carbide fibers and their application to ceramic matrix composites

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

Study on the Mechanical Property of High‐Performance Silicon Carbide Fiber

Synthesis of Polytitanocarbosilane and Preparation of Si–C–Ti–B Fibers

Novel multifibrillar carbon and oxidation-stable carbon/ceramic hybrid fibers consisting of thousands of individual nanofibers with high tensile strength

Research Progress on Microstructure Characterization of Silicon Carbide Fibers

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Superparamagnetic Silicon Carbonitride Ceramic Fibers Through In Situ Generation of Iron Silicide Nanoparticles During Pyrolysis of an Iron-Modified Polysilazane

Microstructure and mechanical properties of SiC fiber/Si-CoSi2 matrix composites fabricated by carbon chemical vapor infiltration and Si alloy melt infiltration process

Slurry material extrusion of chopped carbon fiber reinforced silicon carbide ceramic matrix composites (CMCs)

Fabrication of C/SiC composites by siliconizing carbon fiber reinforced nanoporous carbon matrix preforms and their properties

Processing and Characterization of Continuous Carbon Fiber Reinforced Silicon Oxycarbide Ceramic Matrix Composites

Thermal Mechanical Property Enhancement with Silicon Carbide Ceramic Filled Composites for Industrial Applications

SiC fibers with different diameters exhibiting excellent high-temperature resistance and oxidation resistance

Features of Synthesizing Ceramic Composites Discretely Reinforced by Carbon Fibers and SiC Nanowires Formed in situ in the Combustion Wave

Mechanical properties of SiC fiber/carbon/Si‐Co matrix composites processed using film boiling and melt infiltration

Additive Manufacturing of C/C-SiC Ceramic Matrix Composites by Automated Fiber Placement of Continuous Fiber Tow in Polymer with Pyrolysis and Reactive Silicon Melt Infiltration

Silicon oxycarbide composites reinforced with silicon nitride and in situ formed silicon carbide.

Synthesis and Consolidation of Composite Materials in the SiC–Si3N4–Si2N2O System

Preparation and Properties of Silicon Carbide Ceramics Enhanced by TiN Nanoparticles and SiC Whiskers