Abstract:Abstract There are significant challenges for materials in extreme environments for a variety of applications such as aircraft engines, gas turbines, nuclear reactors, reentry vehicles, and hypersonic structures. Ceramic matrix composites (CMCs) could be ideal candidates to meet these stringent requirements for materials due to their high melting temperatures, high oxidation, corrosion and ablation resistance, low creep, and thermal cycling behavior in such extreme environments. Particularly, continuous fibers can bridge cracks in CMCs and therefore improve the strength and fracture toughness of composites. CMCs are traditionally manufactured by the melting infiltration method. With this method, the high porosity and brittle structure of fabricated CMCs are not capable of withstanding high mechanical and thermal loads. Alternatively, polymer derived ceramic composites are fabricated by incorporating carbon fibers into polymer derived ceramic matrix to achieve high fracture toughness. With the aid of protective coatings with metallic or ceramic materials, such as Nickel and boride nitride, carbon fiber could potentially withstand high temperatures without oxidation. In this study, continuous fiber reinforced silicon oxycarbide composite was manufactured with polysiloxane (PSX) resin and woven carbon fabrics through the polymer infiltration and pyrolysis process (PIP). Re-infiltration of the PSX resin into the composites, curing in an autoclave, and pyrolysis for additional 2 to 10 cycles can increase the yield of ceramics of the composites. A dense structure of the composites was observed by SEM. The EDS results showed that the elemental composition of the composites mainly consisted of carbon, silicon and oxygen. The crystalline structure of the composites was examined through XRD to indicate the degree of polymer pyrolysis to ceramics. The results of four-point bending testing of the composites showed a flexural strength of 62.17MPa, a flexural modulus of 51.30GPa, and a fracture toughness of 1.3 × 108J/m3.

Slurry material extrusion of chopped carbon fiber reinforced silicon carbide ceramic matrix composites (CMCs)

Microstructure and mechanical properties of continuous carbon fiber-reinforced SiC ceramic composite fabricated by direct ink writing

Additive manufacturing of high mechanical strength continuous Cf/SiC composites using a 3D extrusion technique and polycarbosilane‐coated carbon fibers

Additive Manufacturing of C/C-SiC Ceramic Matrix Composites by Automated Fiber Placement of Continuous Fiber Tow in Polymer with Pyrolysis and Reactive Silicon Melt Infiltration

Large-scale material extrusion-based additive manufacturing of short carbon fibre-reinforced silicon carbide ceramic matrix composite preforms

Direct Ink Writing of Chopped Carbon Fibers Reinforced Polymer-derived SiC Composites with Low shrinkage and High Strength

Additive manufacturing of polymer‐derived ceramic matrix composites

Additive manufacturing of Csf/SiC composites with high fiber content by direct ink writing and liquid silicon infiltration

Optimization and Characterization of Preceramic Inks for Direct Ink Writing of Ceramic Matrix Composite Structures

Additive manufacturing of continuous carbon fiber-reinforced SiC ceramic composite with multiple fiber bundles by an extrusion-based technique

Effects of chopped carbon fiber on the forming, structure and mechanical properties of CCF/SiC composites fabricated by SLS and RMI

Modification of the Thermoset Injection Moulding Process for Shaping to Increase the Fibre Length in C/C-SiC Ceramics Produced by the LSI Process

Processing and Characterization of Continuous Carbon Fiber Reinforced Silicon Oxycarbide Ceramic Matrix Composites

Additive manufacturing of carbon fiber reinforced ceramic matrix composites based on fused filament fabrication

High-strength and low-silicon SiC ceramics prepared by extrusion molding 3D printing

Additive manufacturing of complexly shaped SiC with high density via extrusion-based technique – Effects of slurry thixotropic behavior and 3D printing parameters

Stereolithography-based additive manufacturing of lightweight and high-strength Cf/SiC ceramics

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Fabrication of C/SiC composites by siliconizing carbon fiber reinforced nanoporous carbon matrix preforms and their properties

Fabrication and characterization of carbon fiber reinforced SiC ceramic matrix composites based on 3D printing technology