Abstract:Polycarbosilane (PCS) serves as a crucial precursor for silicon carbide (SiC) fibers and ceramics. However, both of the precursor and the resulting SiC ceramics are carbon-rich, which is often viewed as detrimental to their relevant high-temperature properties. In this work, PCS is modified using nanosized Si particles to improve SiC grain growth and reduce carbon content in the resulting SiC ceramics, and the structural evolution during the polymer–ceramic conversion process has been meticulously investigated. The findings reveal that the incorporation of nano-Si into PCS raises its actual ceramic yield and accelerates the organic-inorganic conversion process. This is attributed to the formation of a more crosslinked structure at 200 °C–350 °C, resulting from the reaction between the Si–OH groups in nanosized Si and the Si–H and Si–CH3 groups in PCS. The carbothermic reaction between nano-Si and the free carbon starts at approximately 1200 °C at the periphery of nanosized Si particles, and is accomplished at around 1400 °C. This leads to the formation of large-sized reactive β-SiC. Simultaneously, PCS-derived β-SiC with smaller sizes is also formed at 1300 °C–1400 °C. At 1600 °C–1800 °C, the growth of the reactive and the derived β-SiC in nano-Si-modified PCS is both accelerated due to a substantial decrease in the free carbon content. Consequently, the grain size of β-SiC is much larger than that of unmodified PCS. Additionally, the residual amorphous free carbon transforms into nanocrystalline carbon at around 1400 °C and evolves into graphite carbon at 1600 °C–1800 °C, which exhibits a more ordered structure with larger size compared to that in unmodified PCS.

Preparation of SiC ceramic fiber from a photosensitive polycarbosilane

Synthesis of cyano-polycarbosilane and investigation of its pyrolysis process

Digital light processing of SiC ceramic from allylhydridopolycarbosilane with limited acrylate monomers

Fabrication of SiC ultrafine fiber with low oxygen content by electrospinning, thermal curing and pyrolysis of cyano-polycarbosilane

Improving SiC grain growth and reducing carbon content in pyrolyzed polycarbosilane using nanosized Si particles

Preparation of liquid polycarbosilane containing vinyl ether group and its rapid curing through thiol‐ene click reaction

Synthesis and characteristics of polycarbomethylsilane via a one-pot approach

Flexible and thermally stable SiC fiber mats derived from electrospun boron-doped polyaluminocarbosilane precursors

Effect of Impurities Control on the Crystallization and Densification of Polymer-Derived SiC Fibers

A New SiC Precursor with High Ceramic Yield: Synthesis and Characterization of CHxMeSiH2‐containing Poly(methylsilane‐carbosilane)

Polymethylsilane As A Precursor to High-Purity Silicon-Carbide

Evaluation of Poly(methylsilane‐carbosilane) Synthesized from Methyl‐dichlorosilane and Chloromethyldichloromethylsilane As a Precursor for SiC

Single-source-precursor synthesis and characterization of SiAlC(O) ceramics from a hyperbranched polyaluminocarbosilane

Synthesis of Polytitanocarbosilane and Preparation of Si–C–Ti–B Fibers

Silicon carbide ceramics manufactured by digital light processing and low temperature sintering

Role of in-situ formed free carbon on electromagnetic absorption properties of polymer-derived SiC ceramics

Elemental and structural evolution of polymer-derived SiC fibers fabricated via solution blend and iodine curing methods

LIQUID POLYCARBOSILANE DERIVED AI-CONTAINING SiC CERAMIC PRECURSORS——POLYALUMINOCARBOSILANE

Preparation of Amorphous SiOC Ceramic Powders through Precursor Polymer Pyrolysis

Pore structure and thermal oxidation curing behavior of porous polymer derived ceramics with superhigh porosity fabricated by freeze casting

Preparation and Structural Evolution of SiOC Preceramic Aerogel During High-Temperature Treatment